Good news! We’ve been advised our Burnaby location will be available once renovations are complete. In the meantime, we continue shipping from Edmonton.
IDEAL 45-235 UF Cable Stripper quickly and cleanly strips underground feeder (UF) cable without d...

        UF Cable Stripper · 12/2 to 14/2 AWG solid UF cable · Self-adjusting blades · IDEAL 45-235

        Cable stripper for 12/2 to 14/2 AWG solid underground feeder (UF) cable, with self-adjusting blades and open-throat construction for unlimited strip length. Commonly used where clean jacket removal helps reduce conductor nicks and rework on residential and light commercial jobs.
        Ideal Industries
        143   – Loyalty Rewards
         
        • $143.96
        Available to Order | Typically Arrives in 1 - 3 Weeks From Ontario Factory Warehouse

        What this product is for

        The IDEAL 45-235 is a hand tool for stripping underground feeder (UF) cable, specifically 12/2 to 14/2 AWG solid cable. It is designed to remove the outer sheath and inner insulation cleanly without using a knife for every cut.

        Use for

        Use it for UF cable preparation on residential and light commercial electrical work, service repairs, outdoor branch circuits, and similar flat cable stripping tasks. The open-throat design supports unlimited strip length, which helps when longer jacket removal is needed.

        Avoid for

        Avoid using it as a general-purpose stripper for cable types or conductor sizes outside the listed UF range. It is not the right choice when you need a dedicated stripper for round cable, larger conductors, or precision stripping on unsupported cable constructions.

        Best for

        Best for electricians and contractors who regularly work with 12/2 or 14/2 solid UF cable and want faster, more consistent sheath removal with less chance of nicking conductors. This style of tool is typically chosen to improve repeatability compared with manual knife stripping.

        Installed in

        Used in tool pouches, service kits, and contractor hand-tool sets for field wiring work. Common jobsite applications include outdoor feeds, buried branch circuits, and other installations using UF cable, subject to local code and application requirements.

        Why this product exists

        UF cable is tougher to strip neatly than standard non-metallic cable, so this tool exists to speed up jacket removal and help protect the conductor insulation underneath. The self-adjusting blade action and ergonomic form are intended to reduce repetitive hand strain during repeated stripping.

        Compared with similar products

        Compared with a utility knife, this UF cable stripper offers a more controlled stripping method and is commonly used to reduce accidental conductor damage. Compared with general wire strippers, it is purpose-built for flat UF cable and longer sheath removal. Actual ease of use depends on cable condition, temperature, and installer technique.

        Specifications

        • Manufacturer: IDEAL
        • Manufacturer part number: 45-235
        • Product type: Underground feeder cable stripper
        • Cable type: UF cable; also listed by manufacturer for twin and earth cable
        • Supported cable size: 12/2 to 14/2 AWG solid UF cable
        • AWG range listing from distributors: 14 to 12 AWG
        • Blade action: Self-adjusting stripping blades
        • Construction: Open-throat for unlimited strip length
        • Function: Removes outer cable sheath and inner wire sheathing to desired lengths
        • Design: Lightweight ergonomic handle
        • Colour: Blue
        • Insulated tool: No
        • Maximum strip length noted by distributor: up to 7/8 in (22 mm) in one squeeze
        • Warranty: Limited 90 day

        Typical buying guidance: a dedicated UF stripper is commonly used when repeated jacket removal speed matters more than carrying a general-purpose stripper alone. Actual performance depends on cable construction, installation conditions, and user technique.

        • IDEAL_Canadian-Product-Guide.pdf.coredownload.pdf6.5 MB
          IDEAL INDUSTRIES offers CSA-certified electrical products designed for Canadian electricians. From wire connectors to voltage testers, our tools meet the highest safety and performance standards. Trusted by contractors and industrial teams, IDEAL tools ensure precision, durability, and compliance with the Canadian Electrical Code.
          • SKU
            45-235
          • Weight
            1.5 lbs
          • UPC Code
            783250452354
          • Manufacturer Part #
            45-235
        • Brand
          Ideal Industries
        • Warranty
          5 year

        Minimum Order $20

        We accept the following payment methods:

        Accepted payment methods

        Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.

        Click here for Contractor Cash Account


        Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only. 

        Click here for Contractor Credit Account 


        (Contractor Accounts)

        Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas


        (All Other Accounts)

        Standard Shipping-Free on orders over $499


        Minimum Order Is $20

        Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
         

        • PVC and EMT Pipe 
        • Wire and Cable 
        • Items over 48 inches in length 

        Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.

        Shipping Options:

        • A courier can deliver to your home, office, or your job site
        • Pick up at local depot near you (applies to the following locations)

        Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB 

        Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC 

        Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.

        THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS

        • We cannot deliver to P.O. boxes.
        • A signature may be required for shipments over $500.
        • No weekend delivery.
        • Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.

        Standard Shipping cost on orders less than $499

        Total shipping cost = "Per Shipment" cost + "Per Item" cost.  The "per item" cost is listed in terms of price per pound.

         

        Product Group

        Per Shipment*

        Per Item

        Boxes

        $6.99

        $1.49/lb

        Conduit & Raceway

        $149.99

        $2.49/lb

        Connectors & Fittings

        $5.99

        $1.19/lb

        Data & Structured Home

        $5.99

        $1.19/lb

        Distribution Equipment

        $5.99

        $1.19/lb

        Emergency Lighting

        $6.99

        $1.49/lb

        Heating & Ventilation

        $6.99

        $1.49/lb

        Lighting Controls

        $5.99

        $1.19/lb

        Lighting Indoor

        $6.99

        $1.49/lb

        Lighting Outdoor

        $6.99

        $1.49/lb

        Tools

        $4.99

        $.99/lb

        Wire & Cable

        $49.99

        $2.29/lb

        Wiring Devices

        $5.99

        $1.19/lb

        Any combination of the above items

        Highest applicable per-shipment charge

        As above

        Effective Date: August, 15, 1998

        At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:

        Returns

        Defective Items:

        • If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
        • To initiate a return, please contact our customer service team with your order number and a description of the defect.

        Non-Defective Items:

        • We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.

        Return Process

        Authorization:

        • Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
        • Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.

        Shipping:

        • Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.

        Condition:

        • Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.

        Refunds

        • Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
        • Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.

        Related products

              • Ideal Industries
                Long Nose Pliers with Cutter · 6 in (152 mm) · Dipped Grip Handles · IDEAL 35-036
                35-036
                52   – Loyalty Rewards
                • $52.57
                Available to Order | Typically Arrives in 1 - 3 Weeks From Ontario Factory Warehouse
                Click the image to back order this item from the product page
                    • Ideal Industries
                      GFCI Circuit Tester · 120V AC 3-Wire Receptacles · Built-In GFCI Trip Test · IDEAL 61-051
                      61-051
                      120   – Loyalty Rewards
                      • $120.80
                      Available to Order | Typically Arrives in 1 - 3 Weeks From Ontario Factory Warehouse
                      Click the image to back order this item from the product page
                          • Rack-a-Tier
                            Snatch Strap wire pulling strap · #22 to #12 AWG · fast attachment for conduit pulls · Rack-A-Tiers 69455
                            69455
                            12   – Loyalty Rewards
                            • $12.80
                            Available to Order | Typically Arrives in 1 - 3 Weeks
                            Click the image to back order this item from the product page

                          Footer navigation