Multi-Purpose Hole Saw · 3 in · Carbide-Tipped for Wood with Nails and Abrasive Materials · IDEAL 36-354
What this product is for
This 3 in (76 mm) TRI-Bore™ multi-purpose hole saw is used to cut larger openings in mixed and abrasive materials that can wear out standard bi-metal hole saws faster. It is suited to electrical, maintenance and retrofit work where the cut may pass through wood with nails, cement board, composite enclosures or ceiling tile.
Use for
Use for cutting 3 in (76 mm) openings in wood with embedded nails, cement board, composite electrical enclosures, ceiling tile and similar abrasive materials. IDEAL literature also lists this size as suitable for typical 2 in pipe with couplings applications, where the required opening matches the fitting or penetration detail.
Avoid for
Avoid choosing this hole saw when a standard bi-metal saw is sufficient for clean wood-only or light sheet-metal-only work, or when you need a finished hole size not matched to 3 in (76 mm). Do not assume arbor and pilot are included; this deep-cup design requires the correct longer pilot arrangement.
Best for
Best for electricians and contractors who need one carbide-tipped hole saw for tougher site conditions and mixed materials. It is a practical choice for service vans, retrofit crews and panel or enclosure modification work where material conditions are not always predictable.
Installed in
Typically used on site in electrical rooms, commercial interiors, service upgrades, retrofit projects, composite or non-metallic enclosures, and wall or ceiling assemblies where larger penetrations are needed.
Why this product exists
TRI-Bore™ hole saws are designed to bridge the gap between standard wood-cutting and abrasive-material cutting. The carbide-tipped design is intended to cut faster than self-feed bits in wood and faster than carbide grit in abrasive materials, while the deep angled gullets help with plug removal.
Compared with similar products
Compared with a bi-metal hole saw, this model is better suited to abrasive materials and wood with nails. Compared with carbide-grit styles, it is intended to cut faster in many common trade materials. As a rule of thumb, choose carbide-tipped multi-purpose hole saws when the material mix is uncertain or likely to include fasteners or abrasive board products. Actual cutting speed and life depend on drill power, feed pressure, material thickness and site conditions.
Specifications
- Manufacturer part number: 36-354
- Brand: IDEAL
- Product family: TRI-Bore™
- Product type: Multi-purpose hole saw
- Hole saw diameter: 3 in (76 mm)
- Cutting edge: Carbide-tipped / carbide teeth
- Typical materials: Wood with nails, cement board, composite enclosures, ceiling tile
- Application reference: Commonly used for 2 in pipe with couplings openings
- UPC: 783250714131
- Compatible arbor: IDEAL 35-394 for this size range
- Pilot accessories: IDEAL 36-367 spade bit for wood or 36-368 carbide pilot for abrasive materials, sold separately
- Compliance: RoHS compliant listing found through distributor data
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.