Hole Cutter · 1-1/4 in (32 mm) Carbide-Tipped · TKO for Sheet Metal and Stainless Steel · IDEAL 36-304
What this product is for
The IDEAL 36-304 TKO hole cutter is used to cut 1-1/4 in (32 mm) holes in sheet metal and stainless steel for electrical panels, boxes, cabinets, and similar metal enclosures. It is a carbide-tipped cutter intended for trade use where clean hole quality and repeatable results matter.
Use for
Use for electrical panels, junction boxes, control cabinets, stainless steel enclosures, and other thin metal drilling tasks where a clean finished hole is needed. It is suitable for handheld drills and similar drilling setups commonly used on site and in the shop.
Avoid for
Avoid using this cutter as a general-purpose wood hole saw or in applications outside the manufacturer’s stated metal-cutting use. Do not use excessive speed, impact mode, or dry cutting in harder metals, as this can shorten cutter life.
Best for
Best for electricians and contractors cutting repeated holes in metal enclosures where cleaner edges, less finishing, and longer life than typical bi-metal hole saws are important. A practical rule of thumb is to use cutting oil and controlled drill speed to help manage heat and extend carbide life. Actual performance depends on material thickness, drill condition, feed pressure, and installation practice.
Installed in
Typically used on electrical service equipment, distribution panels, pull boxes, junction boxes, control panels, and fabricated metal enclosures in residential, commercial, and industrial work.
Why this product exists
This hole cutter is designed as a faster, cleaner alternative to traditional knockout methods or standard hole saws for many sheet metal applications. The carbide-tipped cutting edge and pilot drill help start accurately and produce a cleaner hole with less burr in suitable metals.
Compared with similar products
Compared with a standard bi-metal hole saw, a carbide-tipped hole cutter is commonly used for longer life and cleaner cutting in sheet metal and stainless steel. Compared with a knockout punch, it can be a practical choice when access, speed, or tool setup makes drilling the better option. Selection still depends on material, hole count, and site conditions.
Specifications
- Manufacturer part number: 36-304
- Brand: IDEAL
- Product family: TKO
- Product type: Carbide-tipped hole cutter
- Hole size: 1-1/4 in (32 mm)
- Cutting edge: Carbide-tipped
- Applicable materials: Sheet metal and stainless steel
- Typical applications: Panels, boxes, cabinets, and metal enclosures
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.