Cabinet Tip Electronics Screwdriver · 1/8 in x 4 in (3.2 mm x 102 mm) · Slim Shank · IDEAL Industries 36-242
What this product is for
The IDEAL Industries 36-242 is a cabinet tip electronics screwdriver for driving small slotted screws where a slim blade and longer reach are needed. It is suited to panel work, controls, terminals, and other recessed fastening points commonly encountered by electricians and technicians.
Use for
Use for small slotted terminal screws, control devices, electronics assemblies, and light-duty fastening in electrical equipment. The 4 in (102 mm) shank helps reach screws set back from the face of the device or enclosure.
Avoid for
Avoid using this screwdriver for prying, chiselling, striking, or high-torque fastening. It is not an insulated screwdriver for live electrical work unless separately marked and rated by the manufacturer for that use.
Best for
Best for electricians, maintenance staff, and control-panel technicians who need a narrow cabinet tip for better access to small slotted screws without the wider flare of a standard keystone blade.
Installed in
Typically used in control panels, device boxes, low-voltage controls, instrumentation, electronics benches, and similar service kits. Commonly carried in electrician and technician hand-tool sets.
Why this product exists
This screwdriver exists to give better access and fit on small slotted screws in tighter spaces. Compared with broader slotted drivers, a cabinet tip profile is commonly chosen where clearance around the screw head is limited.
Compared with similar products
Compared with a standard keystone slotted screwdriver, this model has a narrower cabinet tip profile for tighter access. Compared with shorter precision drivers, the 4 in (102 mm) shank provides more reach into recessed equipment. As typical trade guidance, cabinet tip drivers are commonly used where surrounding hardware or device faces leave less side clearance; actual fit depends on the screw head geometry and installation conditions.
Specifications
- Manufacturer part number: 36-242
- Brand: IDEAL Industries
- Product type: Electronics screwdriver
- Tip style: Cabinet tip
- Tip size: 1/8 in (3.2 mm)
- Shank length: 4 in (102 mm)
- Overall length: approximately 7-9/16 in (192 mm)
- Shank material: Chrome vanadium steel / CRV steel
- Handle: Plastic handle with ball end / spinner-style top
- Finish: Chrome plated / polished chrome, depending on listing terminology
Specifications should be verified against the manufacturer listing before ordering for a specific service application.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.