Cabinet Tip Electronics Screwdriver · 3/32 in x 2-1/2 in Shaft · Slim Precision Driver · IDEAL 36-240
What this product is for
This cabinet tip electronics screwdriver is used for fine-detail electrical and electronic work where a narrow slotted tip and short shank help reach small fasteners with better control. The 3/32 in tip and 2-1/2 in shaft make it suitable for recessed screws, terminals, controls, and small device adjustments.
Use for
- Small slotted terminal screws in controls and devices
- Panel work and instrumentation with limited clearance
- Electronics service and adjustment work
- Precision fastening where a slim cabinet tip helps fit the screw slot cleanly
Avoid for
- High-torque fastening or stubborn fasteners
- Striking, prying, or chiselling applications
- Live electrical work unless the tool is specifically rated and marked for insulated use
Best for
Electricians, maintenance technicians, panel builders, and service personnel who need a small slotted screwdriver for precise control on light-duty fastening tasks.
Installed in
Typically used around control panels, low-voltage devices, electronics assemblies, terminal blocks, and other equipment with small slotted screws.
Why this product exists
A cabinet tip profile is made for narrower access and better engagement on small slotted screws than a broader standard blade. The short 2-1/2 in (approximately 64 mm) shank helps with control in confined spaces, while the spinner-style top is commonly used for quick fingertip turning on light-duty precision work.
Compared with similar products
Compared with a standard slotted screwdriver, this electronics-style driver is smaller and better suited to delicate work. Compared with longer precision drivers, the shorter shaft is often easier to manage inside crowded panels or equipment. As a rule of thumb, this style is chosen for access and tip fit rather than torque capacity.
Actual performance depends on fastener condition, access, and application.
Specifications
- Manufacturer part number: 36-240
- Brand: IDEAL
- Product type: Electronics screwdriver
- Tip type: Cabinet
- Tip size: 3/32 in (approximately 2.4 mm)
- Shank length: 2-1/2 in (approximately 64 mm)
- Shank material: Chrome vanadium steel
- Overall length: approximately 6-1/6 in (about 156 mm)
- Handle: Slim plastic handle with spinner top style
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.