Insulated Long-Nose Pliers · 8-1/2 in (216 mm) · 1000V Rated with Cutter · IDEAL 35-9038
35-9038
151
– Loyalty Rewards
Electrician’s Tool Kit · 5-Piece · With Holster · IDEAL 35-5792
5-piece electrician’s hand tool kit with holster for everyday wiring, termination and service work. Includes 9-1/4 in (235 mm) linesman pliers with crimper, T-5 wire stripper, two screwdrivers and a Pocket Pal holster for belt carry.
What this product is for
This 5-piece electrician’s tool kit is built for common installation and service tasks such as cutting, stripping, terminating and carrying core hand tools on the belt. It suits electricians, apprentices and maintenance staff who want a compact starter or replacement kit.
Use for
- Branch circuit rough-in and trim-out
- Panel and device work using Phillips and slotted terminal screws
- Stripping solid and stranded conductors within the wire stripper’s listed range
- Belt-carried service work where a compact holster helps keep essential tools close at hand
Avoid for
- Live electrical work unless the task, PPE and insulated tools are specifically required by procedure
- Heavy demolition or cutting tasks outside the intended hand-tool application
- Precision electronics work that calls for smaller specialty tools
Best for
Best for apprentices, service electricians and contractors who need a straightforward everyday hand-tool kit with a holster instead of buying each item separately.
Installed in
Commonly used in residential, commercial and light industrial electrical work, including service calls, device replacement, panel terminations and general wiring tasks.
Why this product exists
This kit groups together the core hand tools many electricians carry most often: linesman pliers, a wire stripper, two screwdrivers and a belt holster. It simplifies tool selection for new apprentices and provides a convenient replenishment option for contractors standardizing basic kits.
Compared with similar products
Compared with buying tools individually, this kit offers a matched set with holster and known IDEAL part numbers. Compared with larger electrician kits, it focuses on the most commonly reached-for hand tools rather than adding extra specialty pieces.
Typical trade guidance: a compact 5-piece kit like this is commonly used for everyday rough-in, trim and service tasks, but most electricians will still add a tester, tape measure and additional drivers based on the job. Actual tool needs depend on installation type, voltage class, site rules and local electrical code.
Specifications
- Manufacturer part number: 35-5792
- Brand: IDEAL
- Kit type: Electrician’s hand tool kit with holster
- Number of pieces: 5
- Included pliers: 9-1/4 in (235 mm) linesman pliers with crimper
- Included wire stripper: T-5 T-Stripper, typically listed for 10-18 AWG solid and 12-20 AWG stranded conductors
- Included Phillips screwdriver: #2 x 4 in (102 mm)
- Included slotted screwdriver: 3/16 in x 4 in (102 mm) cabinet tip
- Included holster: Pocket Pal tool holster
- Handle style: Dipped grip / standard grip style, depending on listing terminology
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
Available to Order | Typically Arrives in 1 - 3 Weeks From Ontario Factory WarehouseWire Stripper · 10-18 AWG solid, 12-20 AWG stranded · Plier nose with spring-loaded shear blades · IDEAL Industries 45-915
45-915
Available to Order | Typically Arrives in 1 - 3 Weeks From Ontario Factory Warehouse48 – Loyalty Rewards
