- Edmonton Stock: 3
Fish rod kit · 24 ft total length with four 6 ft rods · Regular flex fibreglass with bullet nose and J-hook ends · IDEAL 31-612
24 ft fish rod kit with four 6 ft fibreglass rods for routing wire above ceilings, inside walls, and through other concealed spaces. Regular-flex 1/4 in rods balance push strength and manoeuvrability for typical electrical rough-in and retrofit work.
What this product is for
This fish rod kit is used to guide and retrieve conductors through concealed spaces such as suspended ceilings, wall cavities, attics, crawl spaces, and similar pathways where a fish tape may be less practical. The kit includes four 6 ft (1.8 m) fibreglass rods for a combined reach of 24 ft (7.3 m).
Use for
- Routing wire above T-bar ceilings and through wall cavities
- Pulling conductors across short to medium concealed runs
- Electrical rough-in, retrofit, service, and low-voltage cable installation
- Jobs where a sectional rod system is easier to control than a long fish tape
Avoid for
- Use in or near energized circuits
- Long conduit runs where a conventional fish tape is the better tool
- Applications requiring a different flex rating for tighter bends or heavier pushing force
Best for
Best for electricians and contractors who need a regular-flex sectional rod set for everyday wire fishing in ceilings, walls, and access spaces. A 1/4 in rod diameter is commonly chosen when you need a practical balance between stiffness and flexibility for general-purpose wire routing.
Installed in
Typically used in residential, commercial, and institutional buildings during wiring installation, retrofit, and maintenance work. Common jobsite locations include offices, schools, retail spaces, basements, and service areas.
Why this product exists
Sectional fish rods help installers reach concealed spaces with more directional control than a loose cable or some fish tapes. The regular-flex fibreglass construction is intended for controlled pushing and pulling in typical building pathways, while the included end fittings help start and retrieve the rod through obstructions and openings.
Compared with similar products
Compared with shorter kits, this 24 ft (7.3 m) set gives more reach for ceiling and wall runs. Compared with stiffer rods, regular-flex rods are typically easier to guide around moderate bends and offsets. Compared with more flexible rods, they generally provide better push control on straight or lightly obstructed runs. Actual performance depends on pathway layout, bends, obstructions, and installation conditions.
Specifications
- Manufacturer part number: 31-612
- Brand: IDEAL
- Product family: Tuff-Rod Regular Flex Kit
- Product type: Fish rod kit / fishing pole kit
- Total assembled length: 24 ft (7.3 m)
- Rod quantity: 4
- Individual rod length: 6 ft (1.8 m) each
- Rod diameter: 1/4 in (6.4 mm)
- Flex: Regular flex
- Material: Fibreglass
- Colour: White
- Ends included: One threaded bullet nose end and one threaded J-hook end
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 1
Pull Line · 2,200 ft (670 m) · 500 lb Tensile Strength · Bucket Dispensing · IDEAL Industries 31-344
31-344
Available to Order | Typically Arrives in 1 - 3 Weeks From Ontario Factory Warehouse170 – Loyalty Rewards- Edmonton Stock: 16
- Edmonton Stock: 52
Plug-In Circuit Breaker · 15A 1-Pole 120/240V · 10 kAIC Type QP · Siemens Q115
Q115
12 – Loyalty Rewards
