Fish rod kit · 24 ft total length with four 6 ft rods · Regular flex fibreglass with bullet nose and J-hook ends · IDEAL 31-612
31-612
156
– Loyalty Rewards
Fish Rod Kit · 12 ft (3.7 m) total length · 1/4 in regular-flex fibreglass rods with J-hook and bullet nose · IDEAL 31-611
12 ft (3.7 m) regular-flex fish rod kit with three 4 ft sections and 1/4 in fibreglass rods for routing wire above suspended ceilings, through interior walls, and in cable trays. Includes one threaded J-hook and one fixed bullet nose end for common pulling and guiding tasks.
Delivered to you by May 21 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
This fish rod kit is used to guide and retrieve conductors in concealed spaces where a fish tape is not the best fit, such as above suspended ceilings, inside wall cavities, and across short open runs. The regular-flex 1/4 in fibreglass rods provide a balance of push strength and bend for general electrical rough-in and retrofit work.
Use for
- Pulling wire above T-bar and suspended ceilings
- Routing cable through interior wall cavities
- Reaching across cable trays and short concealed spaces
- General-purpose wire guiding where sectional rods are easier to control than a reel-style fish tape
Avoid for
- Long conduit runs where a conventional fish tape is more suitable
- Live electrical environments; use only on de-energized systems and follow safe work practices
- Applications requiring extra-flex glow rods or smaller-diameter rods for tighter bends
Best for
Electricians and contractors who need a compact sectional rod kit for everyday wire-pulling tasks in commercial ceilings, residential walls, and similar concealed spaces. The included J-hook helps with grabbing and pulling, while the bullet nose helps guide the rod through obstructions with less snagging.
Installed in
Used in residential, commercial, and institutional electrical installations, especially renovation and service work where access is limited and wire must be routed through finished spaces.
Why this product exists
A sectional fish rod kit gives better control than a fish tape in many open-plenum and wall-routing jobs. Three 4 ft (1.2 m) sections make the kit easier to carry and assemble on site while still providing 12 ft (3.7 m) of reach.
Compared with similar products
Compared with longer fish tapes, this kit is better suited to short, controlled routing jobs. Compared with extra-flex rods, the regular-flex 1/4 in diameter is typically chosen when electricians want more push strength for straight or moderately offset paths. Actual performance depends on pathway layout, bends, obstructions, and installation conditions.
Specifications
- Manufacturer part number: 31-611
- Brand: IDEAL
- Product family: Tuff-Rod Regular Flex
- Product type: Fishing pole / fish rod kit
- Total length: 12 ft (3.7 m)
- Sections: 3 x 4 ft (1.2 m)
- Rod diameter: 1/4 in (6.4 mm)
- Rod material: Fibreglass
- Flex type: Regular flex
- Colour: White
- Ends included: One threaded J-hook, one fixed bullet nose end
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
Available to Order | Typically Arrives in 1 - 3 Weeks From Ontario Factory WarehousePull Line · 2,200 ft (670 m) · 500 lb Tensile Strength · Bucket Dispensing · IDEAL Industries 31-344
31-344
Available to Order | Typically Arrives in 1 - 3 Weeks From Ontario Factory Warehouse170 – Loyalty Rewards
Landscape Spot Light · MR16 Lamp Ready · Black Finish · Vista Professional Lighting GR2216-B-NL
GR2216-B-NL
Available to Order | Typically Arrives in 1 - 4 Weeks Ships From California USA145 – Loyalty Rewards
