Wire Pulling Lubricant · 1 gal (3.8 L) pail · Polymer gel, water-based · IDEAL Industries 31-371
What this product is for
IDEAL Aqua-Gel II 31-371 is a wire pulling lubricant for electrical and communications cable installation in conduit. It is a water-based polymer gel supplied in a 1 gal (3.8 L) pail and is intended to reduce pulling tension and help cables move more smoothly through bends and longer runs.
Use for
Use for pulling building wire and cable through conduit in residential, commercial, and industrial work. Suitable where electricians want a gel lubricant that clings to cable during the pull, cleans up with soap and water, and dries to a clear film. Commonly used with many cable jacket types used in electrical and data installations.
Avoid for
Avoid using this product as a general-purpose lubricant, mechanical grease, or where the cable or equipment manufacturer specifies a different pulling compound. Always confirm compatibility with the cable jacket and installation method before use.
Best for
Best for conduit pulls where reduced friction, easier application, and easier cleanup matter on the job site. A 1 gal (3.8 L) pail is a practical size for service vans, small-to-medium projects, and crews that want more volume than a squeeze bottle without moving to bulk containers.
Installed in
Used during cable installation in EMT, PVC, rigid conduit, and other raceway systems in buildings, utility spaces, plant environments, and retrofit work. Typical applications include feeder pulls, branch circuit conductors, control cable, and communications cable where permitted by the cable manufacturer.
Why this product exists
Wire pulls through conduit create friction, especially on longer runs and tighter bends. This lubricant exists to help lower pulling force, reduce the chance of jacket scuffing during installation, and improve handling compared with dry pulling. As typical trade guidance, lubricant becomes more useful as run length, conductor size, and bend count increase. Actual pulling performance depends on conduit fill, cable type, bend radius, temperature, and installation conditions.
Compared with similar products
Compared with wax-based pulling compounds, this water-based polymer gel is commonly chosen where easier cleanup and a clear dried film are preferred. Compared with thinner pourable lubricants, a gel formula typically offers better cling on the cable during application. Selection should still be based on pull length, cable type, ambient conditions, and crew preference.
Specifications
- Manufacturer part number: 31-371
- Brand: IDEAL Industries
- Product family: Aqua-Gel II
- Product type: Wire pulling lubricant
- Container size: 1 gal (3.8 L)
- Container type: Pail / bucket
- Formula: Water-based polymer gel
- Colour: Blue
- Film after drying: Clear, non-staining
- Cleanup: Soap and water
- Application: Electrical and communications cable pulling in conduit
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.