Wire Pulling Lubricant · 5 gal (18.9 L) · Yellow 77 wax-based formula · IDEAL 31-355
What this product is for
IDEAL Yellow 77 31-355 is a wax-based wire pulling lubricant supplied in a 5 gal (18.9 L) bucket for electrical conduit installations. It is used to reduce pulling friction, help protect cable jackets during installation, and support smoother pulls on longer or more demanding runs.
Use for
Use for branch circuit, feeder, and service conductor pulls in conduit where a general-purpose pulling lubricant is needed. The creamy formula clings to cable, can be applied by hand or brush, and dries slowly to a thin non-conductive film that will not harden in the raceway under normal use.
Typical buying guidance: a 5 gal bucket is commonly chosen for larger commercial, industrial, or multi-unit residential jobs where multiple pulls or repeated conduit runs are planned.
Avoid for
Avoid using with low-density polyethylene cable jackets and semi-conducting jackets, as manufacturer sources list these as exceptions. If jacket compatibility is critical, confirm against the cable manufacturer's recommendations before use.
Best for
Best for electricians and contractors who need a general-purpose pulling lubricant for long conduit runs, larger wire sizes, or jobs where a bucket format is more practical than small squeeze bottles. It is also useful where a lubricant that remains workable in cold storage and job site conditions is preferred.
Installed in
Used in electrical conduit systems in commercial buildings, industrial facilities, institutional projects, and residential construction across Canada. Common applications include EMT, rigid, PVC, and other raceway systems where conductors are being pulled after conduit installation.
Why this product exists
This product exists to lower pulling tension and reduce jacket abrasion during wire installation. Compared with dry pulling, lubricant is typically used to improve control on longer runs, bends, and higher conductor fill situations. Actual pulling performance depends on conduit layout, bend count, conductor type, fill, and site conditions.
Compared with similar products
Compared with smaller bottles, this 5 gal (18.9 L) bucket is better suited to higher-volume work. Yellow 77 is a wax-based general-purpose formula that clings to cable and dries to a thin film, making it a common choice where installers want more staying power on the conductor during the pull.
Specifications
- Brand: IDEAL
- Manufacturer part number: 31-355
- Product family: Yellow 77
- Product type: Wire pulling lubricant
- Container size: 5 gal (18.9 L)
- Formula base: Wax-based
- Colour: Yellow
- Application method: Hand or brush
- Film characteristic: Dries to a thin, non-conductive film
- Temperature stability: 32°F to 130°F (0°C to 54°C)
- Compatibility: Safe for most cable types except low-density polyethylene and semi-conducting jackets
- Safety characteristics: Non-toxic, non-flammable, non-corrosive
- Listing: UL listed
- UPC: 783250313556
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.