- Edmonton Stock: 1
Pull Line · 2,200 ft (670 m) · 500 lb Tensile Strength · Bucket Dispensing · IDEAL Industries 31-344
What this product is for
This extra heavy-duty pull line is used to install electrical and communication cable in conduit. It provides 2,200 ft (670 m) of continuous-fibre polyline with 500 lb minimum tensile strength for longer pulls and heavier-duty wire installation work.
Use for
Use for pulling conductors through conduit in commercial, industrial, institutional, and larger residential projects. It is also suitable where crews want a line that can be blown or vacuumed into conduit before the pull, and where a visible tracer helps identify the line on site.
Avoid for
Avoid using this pull line as a lifting, hoisting, fall-protection, or load-securing product. It is intended for wire-pulling applications only, and actual pulling performance depends on conduit layout, bends, lubrication, cable weight, and site conditions.
Best for
Best for electricians and contractors who need a higher tensile pull line in a controlled-dispensing bucket for repeated conduit work. A typical trade advantage is faster setup on longer runs because the line can often be blown into empty conduit, though actual results depend on conduit condition and installation method.
Installed in
Commonly used in EMT, rigid, PVC, and other raceway systems where a pull line is needed before conductor installation. The rot- and mildew-resistant construction also makes it suitable for leaving in conduit for future pulls where permitted by the application and local code requirements.
Why this product exists
This product exists to give crews a stronger, longer pull line option for demanding conduit runs while keeping the line organized in a bucket. The white line with red tracer improves visibility, and the packaging is designed to help reduce tangling and wasted time on site.
Compared with similar products
Compared with lighter pull lines, this 500 lb model is better suited to tougher pulls and longer conduit runs. Compared with loose-coil line, bucket dispensing helps with handling and storage. If your application only needs a lighter line, a lower-tensile option may be more economical; if you need a line left in conduit for future use, this product's rot- and mildew-resistant construction is a practical advantage.
Specifications
- Manufacturer: IDEAL Industries
- Manufacturer part number: 31-344
- Product family: Powr-Fish
- Product type: Pull line in bucket
- Length: 2,200 ft (670 m)
- Minimum tensile strength: 500 lb
- Material: Continuous-fibre polyline
- Colour: White with red tracer
- Packaging: Bucket with pre-punched top for dispensing
- Application: Pulling electrical and communication wire through conduit
- Special features: Can be blown or vacuumed into conduit; rot- and mildew-resistant
- UPC: 783250313440
Typical guidance only: pull-line selection should match conduit length, bend count, conductor weight, and pulling method. Actual performance depends on installation conditions, layout, and local electrical code.
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
Fish rod kit · 24 ft total length with four 6 ft rods · Regular flex fibreglass with bullet nose and J-hook ends · IDEAL 31-612
31-612
Available to Order | Typically Arrives in 1 - 3 Weeks From Ontario Factory Warehouse156 – Loyalty RewardsLandscape Spot Light · MR16 Lamp Ready · Black Finish · Vista Professional Lighting GR2216-B-NL
GR2216-B-NL
Available to Order | Typically Arrives in 1 - 4 Weeks Ships From California USA145 – Loyalty Rewards








