Pull Line · 190 lb Tensile Strength · 6,500 ft Bucket Dispenser · IDEAL Industries 31-338
What this product is for
This standard-duty pull line is used to install electrical and communication cable in conduit runs. It is supplied in a 6,500 ft bucket and rated for 190 lb tensile strength, making it suitable for routine pulling work where a lightweight, easy-dispensing line is needed.
Use for
Use for pulling conductors through conduit in residential, commercial, and industrial installations, for pre-stringing conduit, and for jobs where the line may be blown or vacuumed into place before the cable pull. The white line with grey tracer helps with identification on site.
Avoid for
Avoid using this pull line where a heavier-duty pulling product or higher tensile rating is required, or where the pulling load is expected to exceed the 190 lb rating. Always match the pull line to the cable weight, conduit layout, bends, lubricant used, and pulling method.
Best for
Best for electricians and contractors who want a long-length bucket dispenser for repeated conduit pulls and cleaner jobsite handling. The bucket with pre-punched top helps reduce tangles and spills during payout.
Installed in
Commonly used with conduit systems in houses, commercial buildings, tenant improvements, service work, and communication cabling projects. It may also be left in conduit for future pulls because the line is resistant to rot and mildew.
Why this product exists
This product gives installers a ready-to-use pull line that feeds smoothly from a bucket instead of a loose coil. For long conduit runs, a pre-packaged pull line can reduce setup time and waste compared with improvised stringing methods.
Compared with similar products
Compared with heavier-duty pull lines, this Valu-Line product is intended for standard-duty work rather than maximum pulling force. A practical rule of thumb is to choose a higher-rated line when conductor size, conduit fill, run length, or bend count increases. Actual pulling load depends on cable type, conduit condition, lubricant, and installation layout.
Specifications
- Brand: IDEAL Industries
- Manufacturer part number: 31-338
- Product family: Valu-Line
- Product type: Standard-duty pull line in bucket
- Tensile strength: 190 lb
- Length: 6,500 ft (approximately 1,981 m)
- Material: Continuous-fibre polyline
- Colour: White with grey tracer
- Packaging: Bucket with pre-punched top
- Key features: Can be blown or vacuumed into conduit; resists rot and mildew; suitable to leave in conduit for future use
- Typical application: Pulling electrical and communication wiring
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.