Meter Socket Base · 400A Main 3-Gang, 200A per Position · Overhead/Underground, Left-Hand Entry · Hydel HC43R-BC

What this product is for

The Hydel HC43R-BC is a 3-gang meter socket base for 120/240V single-phase service with a 400A main bus and three 200A meter positions. It is used where multiple tenant or suite services need to be metered from one assembly, typically in residential multi-unit and light commercial applications.

Use for

Use for British Columbia service installations requiring three meter positions, 200A per position, with overhead and underground service capability. Suitable where a compact multi-position meter base is preferred over separate single meter sockets.

Avoid for

Avoid for projects that require a different utility-approved configuration, CT metering, disconnecting means not provided by this assembly, or service ratings outside the listed 400A main / 200A per position arrangement. Do not assume left-hand or right-hand entry without confirming the exact part number and utility standard.

Best for

Best for electricians and contractors building duplex/triplex or small multi-occupancy services where three separately metered 200A positions are needed in one enclosure. It can reduce wall space and simplify layout compared with installing multiple individual meter bases.

Installed in

Typically installed outdoors in utility meter locations on residential and light commercial buildings. Weatherproof enclosure style is commonly used for exterior mounting. Verify final mounting height, working clearance, and utility placement rules with the serving authority.

Why this product exists

This meter base exists to provide a factory-bussed multi-meter solution for services that need three separate 200A metered positions from one 400A main assembly. For contractors, it is commonly selected to streamline service entrance layout and reduce the number of separate enclosures on the wall.

Typical buying guidance: a 200A meter position is commonly paired with feeders and distribution sized for a full residential suite or small commercial occupancy, but actual service design depends on calculated load, utility requirements, and local electrical code.

Compared with similar products

Compared with 2-gang units, this 3-gang assembly adds one more metered position while keeping the same general 400A main class. Compared with 4-gang assemblies, it is a better fit when only three tenant meters are required and wall space is limited. Always confirm whether the project calls for left-hand entry, right-hand entry, ring style, jaw configuration, and any blank compartment arrangement.

Specifications

• Manufacturer: Hydel
• Manufacturer part number: HC43R-BC
• Product type: Multi-position meter socket base
• Meter positions: 3-gang
• Main rating: 400A
• Per position rating: 200A
• Voltage: 600V class listing shown by distributor/manufacturer catalogue references; confirm application voltage with utility and project documents
• Service type: Overhead or underground
• Entry orientation: Left-hand entry indicated by BC listing source
• Meter socket style: 4-jaw references appear on distributor listings; verify against project requirement before purchase
• Approximate dimensions from Hydel catalogue family listing: 22 13/16 in W x 27 13/16 in H x 6 1/8 in D (about 579 x 706 x 156 mm)
• Approximate weight from Hydel catalogue family listing: 58 lb (26.3 kg)
• Enclosure: Outdoor weather-resistant meter enclosure, commonly NEMA 3R / CSA weatherproof style on comparable listings

Actual suitability depends on BC hydro or FortisBC utility approval, installation conditions, conductor selection, service layout, and local electrical code.