- Stock in BC
Meter Socket · 200A 120/240V Single Phase 4-Jaw With Isolated Neutral · Overhead/Underground BC Hydro Approved · Hydel EK400ROBC
EK400ROBC
142
– Loyalty Rewards
:
from
to
Clear
Clear
Service Entrance Mast Kit · 200A · BC Configuration with Mast Coupler and Rack · Hydel 2500200MCR
SKU: 2500200MCR
200A service entrance mast kit for British Columbia overhead service installations, supplied with entrance cap, roof flange, mast clamps, light-duty rack and mast coupler. Suitable for contractors replacing or assembling a 200A mast set where the local utility and code requirements match the listed BC configuration.
What this product is for
This Hydel 2500200MCR is a 200A service entrance mast kit used for overhead electrical service installations in British Columbia configurations. It groups the main mast hardware needed to assemble a service mast above the meter and service equipment.
Use for
Use for 200A overhead service mast assemblies where a BC-style kit is specified and a mast coupler and rack are required. Commonly used for residential service upgrades, service replacements, and new overhead service entrances, subject to utility requirements and local electrical code.
Avoid for
Avoid using this kit where the utility, municipality, or inspection authority requires a different provincial configuration, different rack style, or different mast hardware. Do not assume interchangeability with Ontario, Quebec, or New Brunswick mast kits without confirming the bill of material.
Best for
Best for electricians and contractors who need a packaged 200A mast kit for BC service work and want the key mast components supplied together under one part number. This helps reduce parts matching on service change jobs.
Installed in
Typically installed on residential and light commercial overhead service entrances. The roof flange mounts at the roof penetration, while the mast clamps secure the mast to structure. Actual mast, conductor sizing, and final assembly must match the service design, utility standard, and site conditions.
Why this product exists
This product exists to simplify sourcing for a 200A overhead mast installation by bundling the commonly required service entrance components into one kit. For service upgrade work, this can help reduce missed components and speed up jobsite preparation.
Compared with similar products
Compared with other Hydel mast kits, the 2500200MCR is specifically listed as a BC 200A mast kit and includes both a light-duty rack and an MC200 mast coupler. Other provincial kits may use different roof flanges, straps, reducers, or rack styles, so matching the exact regional configuration matters.
Typical buying guidance only: for overhead service work, mast kit selection is usually driven by utility standard, service rating, and the exact support hardware required. Actual installation requirements depend on local electrical code, utility servicing rules, mast height, conductor tension, and building layout.
Specifications
- Brand: Hydel
- Manufacturer part number: 2500200MCR
- Product type: Service entrance mast kit
- Service rating: 200A
- Regional configuration: British Columbia
- Mast component: Kit
- Included entrance cap: 1 x 2521-2
- Included roof flange: 1 x 2506NC2
- Included mast clamps: 3 x 2014U
- Included rack: 1 x 2518U light-duty rack
- Included mast coupler: 1 x MC200
- UPC: 620757070547
- Application: Overhead service mast assembly
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
201 In British Columbia Warehouse As Of July 24th, 2026- Edmonton Stock: 14
- Stock in BC
- Edmonton Stock: 1
Circuit Breaker 1-Pole 15A 120/240V Plug-In Thermal-Magnetic Q-Line | ABB THQL1115
THQL1115
Available to Order | Typically Arrives in 1 - 3 Weeks11 – Loyalty Rewards
