- Edmonton Stock: 173
LED ribbon power feed clip · for 1W or 3W ribbon · clip-style power connection · Axite Lighting H8W1
Clip-style power feed connector for Axite 1W or 3W LED ribbon installations. Commonly used to bring power to compatible ribbon sections for residential and light commercial lighting; verify ribbon series and connector style before ordering.
What this product is for
This LED ribbon power feed clip is used to connect power to compatible Axite 1W or 3W ribbon lighting. It provides a clip-style connection point for ribbon runs where a secure feed connection is required.
Use for
- Power feed connection on compatible Axite LED ribbon
- Residential accent lighting, millwork, shelving, and under-cabinet ribbon layouts
- Light commercial ribbon installations where a compact connector is preferred
Avoid for
- Ribbon systems that use a different connector family or tape width
- Applications where a butt connector or joiner is required instead of a power feed
- Installations where manufacturer compatibility has not been confirmed
Best for
Best for electricians and lighting installers matching existing Axite ribbon accessories and needing a simple field connection for 1W or 3W ribbon sections.
Installed in
Typically installed in indoor ribbon lighting systems for cabinetry, display lighting, coves, shelving, and other low-voltage LED ribbon applications. Actual suitability depends on the ribbon series, driver, location rating, and enclosure method.
Why this product exists
It allows power to be brought to compatible LED ribbon without hard-splicing directly to the tape. This can help speed installation and simplify service on matching ribbon systems.
Compared with similar products
Choose this power feed clip when you need to supply power to the ribbon. A butt connector is typically used to join ribbon-to-ribbon, while a joiner connector is commonly used to bridge a gap between sections. As a rule of thumb for LED strip systems, 24V layouts are often preferred for longer runs to help manage voltage drop, but actual performance depends on run length, load, wire size, and driver selection.
Actual performance depends on installation conditions, layout, and local electrical code.
Specifications
- Brand: Axite Lighting
- Manufacturer part number: H8W1
- Product type: LED ribbon power feed clip
- Application: Power feed connection
- Compatible ribbon rating: 1W or 3W series
- Connector style: Clip-style
- Product family: LED ribbon accessory
- Typical market use: Residential and light commercial LED ribbon installations
- Country market focus: Canada
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 81
Shallow LED Aluminum Channel · 8 ft (2.44 m) · Opal Lens · Axite Lighting SLC-002S
SLC-002S
Restocking38 – Loyalty Rewards- Edmonton Stock: 65
- Edmonton Stock: 219
- Edmonton Stock: 215
- Edmonton Stock: 97
- Edmonton Stock: 123
- Edmonton Stock: 360
- Edmonton Stock: 14
3 w/ft Under Cabinet LED Strip - 254 lm/ft · 3000K · 24V · 16 ft
EV3-IN-16-24V-3000
Restocking89 – Loyalty Rewards
