Plug Fuse · 30A 125VAC · Fast-Acting Screw Type with Visual Indicator · Mersen GP30
GP30
3
– Loyalty Rewards
:
from
to
Clear
Clear
Plug Fuse · 20A 125VAC · Fast-Acting Type P Screw-In · Mersen GP20
SKU: GP20
20A 125VAC fast-acting Type P plug fuse for non-motor receptacle and lighting circuits using an Edison-base fuse holder. Commonly used for residential and light industrial fused circuits in older installations; confirm fuse type, voltage and amp rating before replacement.
What this product is for
This is a 20A, 125VAC fast-acting Type P plug fuse with a screw-in Edison base for branch circuits in older fused panels and fuse holders. It is intended for non-motor loads such as receptacle and lighting circuits where a plug fuse of the same type and rating is specified.
Use for
Use for replacing a matching 20A Type P plug fuse in 125V AC circuits, typically in residential or light industrial applications with Edison lamp holder style fuse sockets. Typical non-motor loads include lighting and general receptacle circuits where fast-acting protection is required.
Avoid for
Do not use this fuse for motor loads, cycling loads, or electric heating circuits where a time-delay or different plug fuse type may be required. Do not substitute for a different ampere rating, voltage rating, or fuse type, and do not use where a tamper-resistant Type S system is required.
Best for
Best for electricians and maintenance buyers servicing older fused distribution equipment that uses screw-in plug fuses. It is a practical replacement when the panel or holder is designed for Edison-base Type P plug fuses and the circuit is a non-motor 20A, 125V application.
Installed in
Installed in Edison-base fuse holders or older fuse panels. Approximate fuse dimensions are 1.126 in x 1.29 in (28.6 mm x 32.8 mm), which helps when checking enclosure and holder fit.
Why this product exists
Plug fuses provide branch-circuit overcurrent protection in legacy fused systems. This Type P fast-acting version is used to open quickly on overloads and faults in non-motor circuits, helping protect wiring and connected equipment where the original design calls for a 20A plug fuse.
Compared with similar products
Compared with time-delay plug fuses, this fast-acting model is better suited to lighting and receptacle circuits rather than motor starting loads. For Canadian applications, distributor guidance indicates Type P plug fuses are used for non-motor loads, while Type D styles are used for electric heating and cycling loads. Actual suitability depends on the equipment design and local electrical code.
Specifications
- Manufacturer: Mersen
- Part number: GP20
- Product type: Plug fuse
- Fuse type: Type P
- Action: Fast-acting / non-time-delay
- Amperage rating: 20A
- Voltage rating: 125VAC
- Interrupt rating: 10 kA
- Mounting / connection: Screw-in Edison base
- For use with: Edison lamp holder style fuse socket
- Approximate dimensions: 1.126 in x 1.29 in (28.6 mm x 32.8 mm)
- Applications: Residential and industrial receptacle and lighting circuits
- Standards: UL 248-11, CSA Certified Class 142301
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
Available to Order | Typically Arrives in 1 - 3 Weeks From Western Canada WarehousePlug Fuse · 15A 125V AC · One-Time Edison Base · Fusetek GP15
GP15
Available to Order | Typically Arrives in 1 - 3 Weeks From Western Canada Warehouse3 – Loyalty Rewards
