Plug Fuse · 30A 125VAC · Fast-Acting Screw Type with Visual Indicator · Mersen GP30
GP30
3
– Loyalty Rewards
:
from
to
Clear
Clear
Plug Fuse · 15A 125V AC · One-Time Edison Base · Fusetek GP15
SKU: GP15
15A one-time plug fuse with Edison base for older fused panels and plug fuse holders rated 125V AC. Commonly used for branch circuits where a non-time-delay replacement is required; always match the fuse type, amp rating and voltage to the equipment and circuit requirements.
What this product is for
This plug fuse is used to provide overcurrent protection in older fused distribution equipment that accepts Edison-base plug fuses. It is a one-time, non-resettable fuse rated 15A at 125V AC.
Use for
Use for replacing an existing 15A Edison-base plug fuse in compatible fuse panels, fuse blocks or legacy branch-circuit applications where the original specification calls for a one-time plug fuse. Suitable when the holder is designed for threaded plug fuses and the circuit voltage does not exceed 125V AC.
Avoid for
Avoid using this fuse where a time-delay fuse is specified, where the circuit requires a rejection-base Type S fuse, or where the system voltage exceeds 125V AC. Do not upsize the amp rating to stop nuisance blowing.
Best for
Best for maintenance replacement in older residential or light commercial fused panels using Edison-base plug fuses. Electricians typically choose this style when replacing like-for-like protection on legacy 15A circuits.
Installed in
Installed in compatible screw-in fuse sockets in older fuse panels and fused branch-circuit holders. Typical body size for this style is approximately 1.13 in diameter x 1.29 in long (about 29 x 33 mm), but confirm fit against the existing fuse and holder before ordering.
Why this product exists
One-time plug fuses are designed to open the circuit under overload or fault conditions and then be replaced. They remain in service where legacy fused systems are still maintained rather than converted to breakers.
Compared with similar products
Compared with time-delay plug fuses, a one-time fuse is generally selected for circuits that do not require temporary inrush tolerance. Compared with Type S rejection-base fuses, Edison-base plug fuses fit standard threaded sockets found in many older installations. Always verify the required fuse class and base style before purchase.
Specifications
- Product type: Plug fuse
- Current rating: 15A
- Voltage rating: 125V AC
- Fuse operation: One-time / non-time-delay
- Base type: Edison base, threaded mount
- Application: Overcurrent protection for compatible legacy fused circuits
- Typical interrupt rating: 10 kA
- Typical size: 1.126 in diameter x 1.29 in length (approximately 29 x 33 mm)
Typical trade guidance: 15A branch circuits are commonly associated with #14 AWG copper conductors in many applications. Actual circuit design, conductor type, installation conditions and local electrical code requirements must always be verified before replacement.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
Available to Order | Typically Arrives in 1 - 3 Weeks From Western Canada WarehousePlug Fuse · 20A 125VAC · Fast-Acting Type P Screw-In · Mersen GP20
GP20
Available to Order | Typically Arrives in 1 - 3 Weeks From Western Canada Warehouse54 – Loyalty Rewards- Edmonton Stock: 3
Driver Bit · #2 Robertson Square · 4 in Length · Red · Rack-A-Tiers 70240R
70240R
3 – Loyalty Rewards
