- Edmonton Stock: 2
:
from
to
Clear
Clear
Copper Mechanical Lug · 8-2 AWG · 1-Hole Single Collar · Techspan SLU70
SKU: SLU70
Copper mechanical lug for 8-2 AWG copper conductors with a single-collar, 1-hole offset pad design. Commonly used for panel, grounding and equipment terminations where a compact mechanical connection and 1/4 in stud mounting are required.
What this product is for
This copper mechanical lug is used to terminate 8-2 AWG copper conductors onto equipment, panels, bars or other connection points that accept a 1-hole lug. The single-collar mechanical design allows field termination without crimp tooling.
Use for
Use for copper conductor terminations in switchboards, panelboards, control equipment, grounding and bonding assemblies, and other electrical connections where a compact 1-hole lug is suitable. It is commonly selected when a reusable or serviceable mechanical connection is preferred.
Avoid for
Avoid using this lug where an aluminium conductor lug is required, where a 2-hole pad is specified, or where the stud size does not match the mounting point. Do not assume suitability for fine-stranded or flexible conductors unless the installation listing specifically permits it.
Best for
Best for electricians and panel builders needing a compact copper mechanical lug for #8 to #2 AWG copper conductors, especially where space is limited and a 1/4 in (6.4 mm) stud connection is used.
Installed in
Typically installed in electrical panels, distribution equipment, control cabinets, grounding points, machinery terminations and retrofit service work in residential, commercial and industrial applications.
Why this product exists
This style of lug provides a practical alternative to compression lugs when installers need a mechanical set-screw termination that is compact, serviceable and suited to a range of copper conductor sizes. Range-taking lugs can help reduce stocked lug variations on service vehicles and in shop inventory.
Compared with similar products
Compared with compression lugs, this mechanical lug does not require a crimp tool and is easier to replace or re-terminate in the field. Compared with 2-hole lugs, the 1-hole format is more compact but offers less resistance to rotation, so matching the application and mounting method matters.
Specifications
- Product type: Copper mechanical lug
- Conductor range: #8 to #2 AWG copper
- Mounting: 1-hole
- Stud size: 1/4 in (6.4 mm)
- Configuration: Single collar, compact offset pad
- Conductor ports: 1 conductor
- Material: Copper / electrolytic copper
- Temperature rating: 90°C
- Approvals reported by listings: CSA, UL 486A/B
- Typical overall length: approximately 1-17/32 in (39 mm)
Buying note: Verify conductor stranding, stud size, and equipment termination requirements before ordering. Actual suitability depends on conductor type, installation method, torque, and local electrical code.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 101
- Edmonton Stock: 24
- Edmonton Stock: 28
- Edmonton Stock: 60
