Copper Mechanical Lug · #14 to #6 AWG · 1-Hole Offset Tongue · Techspan SLU35
What this product is for
This copper mechanical lug is used to terminate one copper conductor onto a pad, bar, or equipment connection point. The SLU35 is sized for #14 to #6 AWG conductors and uses a mechanical set-screw style connection.
Use for
Use for panel terminations, grounding and bonding connections, control equipment, transformers, generators, and other electrical terminations where a one-hole copper lug is required. The offset tongue can help when conductor routing or equipment clearance is limited.
Avoid for
Avoid using this lug where a compression lug is specified, where conductor material compatibility is not confirmed, or where the wire size falls outside the listed range. Do not use without confirming torque, conductor type, and code requirements for the installation.
Best for
Best for electricians and contractors needing a compact one-conductor mechanical lug for smaller copper conductors in service, distribution, bonding, or control applications.
Installed in
Typically installed in panelboards, switchgear, control cabinets, equipment enclosures, grounding bars, and similar electrical assemblies in residential, commercial, and light industrial work.
Why this product exists
This style of lug provides a field-installable mechanical termination without crimp tooling. The offset tongue and single-collar design are commonly used where a straightforward bolted connection is needed on smaller copper conductors.
Compared with similar products
Compared with compression lugs, a mechanical lug is typically faster to install and easier to service in the field. Compared with straight-tongue lugs, the offset tongue can provide better clearance in some layouts. Actual fit depends on conductor stranding, hardware, and equipment spacing.
Specifications
- Product type: Copper mechanical lug
- Conductor range: #14 to #6 AWG copper
- Conductors: 1
- Mounting: 1-hole
- Tongue style: Offset tongue
- Material: Electrolytic copper
- Set screw: Plated steel, slotted style
- Mounting hole diameter: 0.20 in (5.1 mm) approximately
- Overall length: 1.31 in (33 mm) approximately
- Width: 0.38 in (9.7 mm) approximately
- Approvals commonly listed for this series: cULus, CSA, RoHS
Dimensions and approvals should be confirmed against the final manufacturer datasheet before ordering for specification-driven jobs.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.