Mechanical lug · 14-10 AWG copper conductor range · 1-hole offset tongue · Techspan SLU25
What this product is for
This copper mechanical lug is used to terminate one 14-10 AWG copper conductor onto equipment pads, bars, or other connection points using a single mounting hole. It is suited to electrical terminations where a compact solderless lug is preferred for serviceability and straightforward field installation.
Use for
Use for copper conductor terminations in panels, control equipment, grounding and bonding points, and other power or control connections that accept a 1-hole lug. The offset tongue helps when conductor entry and mounting position need a compact layout.
Avoid for
Avoid using this lug with aluminium conductors unless the manufacturer specifically approves that application. Do not use where a different stud size, multi-conductor lug, compression lug, or direct-burial rated connector is required.
Best for
Best for electricians and contractors needing a small copper mechanical lug for #14 to #10 AWG terminations with a single-hole mount. It is a practical choice when field wiring may vary within the listed conductor range and a reusable mechanical connection is preferred.
Installed in
Typically installed in switchboards, panelboards, control cabinets, equipment enclosures, machinery connections, and similar electrical assemblies. Typical applications depend on conductor type, mounting hardware, enclosure space, and local electrical code.
Why this product exists
This style of lug provides a mechanical termination method for smaller copper conductors without requiring crimp tooling. Typical trade benefit: range-taking lugs can reduce stocked connector counts when installers work across several conductor sizes. Actual suitability depends on conductor stranding, hardware, torque, and installation conditions.
Compared with similar products
Compared with compression lugs, a mechanical lug is generally faster to install and easier to service in the field. Compared with larger lay-in or multi-port lugs, this compact 1-conductor, 1-hole design is better suited to smaller copper conductors and tighter equipment spaces.
Specifications
- Product type: Copper mechanical lug
- Conductor range: 14-10 AWG copper
- Number of conductors: 1
- Mounting: 1-hole
- Tongue style: Offset tongue
- Material: Copper
- Typical mounting hole size: 5/32 in (approximately 4.0 mm)
- Typical length: 0.91-1.00 in (approximately 23-25 mm)
- Typical width: 5/16 in (approximately 7.9 mm)
- Temperature rating: typically 90°C where listed by source
- Approvals commonly shown by matching SLU-25 listings: UL and CSA
Dimensions and ratings above are based on matching SLU-25 pattern listings from established lug manufacturers and distributors. Confirm final fit, approvals, and torque requirements against the exact Techspan source or packaging before ordering for specification-driven jobs.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.