- Edmonton Stock: 18
Mechanical lug · #14 to #2 AWG · aluminium dual-rated 1-conductor 1-hole · Techspan LA2
Aluminium mechanical lug for one copper or aluminium conductor in the #14 to #2 AWG range, with a single mounting hole and tin-plated body for reduced contact resistance. Commonly used for panel, grounding, and equipment terminations where a reusable mechanical connection is preferred.
Delivered to you by May 21 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
This mechanical lug is used to terminate one conductor onto equipment, bus, or a mounting surface using a single-hole connection. It is suited to copper or aluminium conductors within the listed wire range where a mechanical, field-installable termination is required.
Use for
Use for terminating #14 to #2 AWG conductors in panels, control equipment, grounding and bonding assemblies, and other power distribution terminations rated up to 600 V where a one-conductor, one-hole lug is appropriate.
Avoid for
Avoid using this lug where a compression connector is specified, where conductor size falls outside the listed range, or where the equipment requires a different stud or hole size. Do not assume suitability for fine-stranded or flexible conductors unless the equipment and connector documentation specifically allow it.
Best for
Best for electricians and panel builders who need a compact, reusable aluminium mechanical lug for copper or aluminium conductors without requiring a crimping tool.
Installed in
Typically installed in switchboards, panelboards, disconnects, control cabinets, grounding bars, and equipment enclosures in residential, commercial, and light industrial applications.
Why this product exists
This lug provides a practical termination method when installers need a bolted conductor connection that can be landed with standard hand tools. A mechanical lug is commonly chosen when serviceability and conductor changes are more important than a permanent compression connection.
Compared with similar products
Compared with compression lugs, this mechanical lug installs without a crimp tool and is typically reusable. Compared with larger multi-conductor or two-hole lugs, this model is intended for one conductor and one-hole mounting, making it a better fit where space is limited and the equipment termination matches the lug geometry.
Typical trade guidance: mechanical lugs are commonly selected where future maintenance or conductor replacement is expected. Actual suitability depends on conductor type, termination torque, enclosure conditions, and local electrical code.
Specifications
- Type: Mechanical solderless lug
- Material: Aluminium alloy with electro-tin plating
- Conductor range: #14 to #2 AWG
- Conductor compatibility: Copper or aluminium conductors
- Number of conductors: 1
- Mounting: 1-hole
- Voltage rating: 600 V AC
- Stud size: approximately 17/64 in
- Overall length: approximately 1.16 in (29.4 mm) to 1-5/32 in (29 mm)
- Width: approximately 1/2 in (12.7 mm)
- Typical feature: reusable mechanical termination using standard hand tools
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 10
- Edmonton Stock: 311
- Edmonton Stock: 1345
- Stocking Transition · Limited Availability
- Edmonton Stock: 25
