- Edmonton Stock: 8
:
from
to
Clear
Clear
Mechanical Lug · 14 AWG to 1/0 AWG · Aluminium Dual-Rated 1-Conductor 1-Hole · Techspan LA0
SKU: LA0
Aluminium mechanical lug for terminating one copper or aluminium conductor in the 14 AWG to 1/0 AWG range on a single-bolt connection point. Commonly used in panels, equipment terminations, and grounding or bonding assemblies where a compact 1-hole lug is required.
Delivered to you by Aug 17 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
This aluminium mechanical lug is used to terminate one conductor onto equipment, bus connections, panels, enclosures, or other single-hole mounting points. It is suited to conductor sizes from 14 AWG to 1/0 AWG where a mechanical set-screw style termination is preferred.
Use for
Use for copper or aluminium conductors within the listed wire range, including service, distribution, grounding, bonding, and equipment connection work. A 1-hole lug is commonly selected where space is limited and a straightforward bolted termination is needed.
Avoid for
Avoid using this lug where a 2-hole pad is specified for added stability, where conductor size falls outside 14 AWG to 1/0 AWG, or where the equipment listing requires a different lug type. Do not assume compatibility with fine-stranded cable unless the terminal rating specifically allows it.
Best for
Best for electricians and contractors needing a compact mechanical lug for one conductor and one mounting point. It is a practical choice for retrofit work, panel terminations, and general-purpose Cu/Al conductor landing.
Installed in
Typically installed in switchboards, panelboards, disconnects, control cabinets, junction boxes, and equipment grounding or bonding points. The single-hole format fits common bolted terminations using a compact lug footprint.
Why this product exists
This type of lug provides a field-installable conductor termination without crimp tooling. It gives installers a practical way to land one conductor onto a fixed stud or pad while covering a broad wire range in one connector.
Compared with similar products
Compared with compression lugs, a mechanical lug installs without a crimp tool and is often preferred for service and maintenance work. Compared with 2-hole lugs, this 1-hole version takes less space but offers less resistance to rotation. As typical guidance, 1-hole lugs are commonly used where equipment pads and space constraints allow; actual suitability depends on the equipment listing, conductor type, and local electrical code.
Specifications
- Product type: Mechanical lug
- Material: Aluminium
- Conductor compatibility: Copper and aluminium, dual-rated
- Conductor range: 14 AWG to 1/0 AWG
- Number of conductors: 1
- Mounting: 1-hole
- Application: Equipment, panel, grounding, bonding, and distribution terminations
- Installation note: Verify conductor class, torque requirements, and equipment compatibility before installation
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 8
- Edmonton Stock: 20
- Edmonton Stock: 13
- Edmonton Stock: 50
Plug-In Circuit Breaker · 15A 1-Pole 120/240V · 10 kAIC Type QP · Siemens Q115
Q115
12 – Loyalty Rewards
