Aluminium Mechanical Lug · 2-Conductor · #2 AWG to 600 kcmil · 1-Hole Mount · Techspan L2A600
What this product is for
This aluminium mechanical lug is used to terminate two conductors in a single connector body and mount them to equipment or a bus connection using one mounting hole. It is suited to electrical distribution, service, feeder, and equipment connection work where a dual-conductor mechanical lug is required.
Use for
Use for terminating conductors in the #2 AWG to 600 kcmil range where a 2-conductor, 1-hole aluminium mechanical lug matches the equipment and conductor specification. Common applications include switchgear, panels, distribution equipment, and other power terminations requiring a bolted lug connection.
Avoid for
Avoid using this lug where a compression connector is specified, where the conductor range does not match, where the required tongue or pad configuration is different, or where the equipment calls for a 2-hole lug for added stability. Do not assume suitability for every conductor type without confirming the product listing and installation requirements.
Best for
Best for contractors and maintenance electricians needing a dual-conductor mechanical lug with a broad conductor range and a simple 1-hole mounting format. It can help when two conductors need to land at one termination point, provided the equipment listing permits that connection method.
Installed in
Typically installed in panelboards, switchboards, control equipment, distribution sections, and other electrical enclosures with bolted termination points. Always confirm enclosure space, pad layout, and torque requirements before installation.
Why this product exists
This style of lug provides a field-installable mechanical termination for larger conductors without requiring a crimping system. A 2-conductor body allows two conductors to terminate in one lug where the equipment design and code-compliant installation permit it.
Compared with similar products
Compared with a single-conductor lug, this 2-conductor design allows two conductors in one connector body. Compared with a 2-hole lug, the 1-hole version is typically simpler to mount but may offer less resistance to rotation, so pad design and equipment requirements matter. Mechanical lugs are also commonly chosen where field serviceability is preferred over compression-style terminations.
Specifications
- Product type: Aluminium mechanical lug
- Manufacturer part number: L2A600
- Brand: Techspan
- Conductor capacity: 2 conductors
- Conductor range: #2 AWG to 600 kcmil
- Mounting style: 1-hole
- Material: Aluminium
- Typical application: Power and distribution terminations
- Buying note: Confirm conductor material compatibility, mounting hole size, and torque requirements from the approved installation documentation before use.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.