Mechanical Lug · 6 AWG to 350 kcmil · 2-Conductor 1-Hole Aluminium · Techspan L2A350
What this product is for
This mechanical lug is used to terminate two conductors onto a single one-hole connection point in electrical distribution and equipment wiring. It is suited to applications where a compact dual-conductor lug is needed for conductors from 6 AWG up to 350 kcmil.
Use for
Use for panelboards, switchgear, distribution equipment, grounding and bonding points, or other approved terminations where a two-conductor mechanical lug with one mounting hole is specified. This style is commonly selected when field termination flexibility is needed instead of a crimp connector.
Avoid for
Avoid using this lug where a two-hole pad is specified, where conductor range falls outside 6 AWG to 350 kcmil, or where the equipment listing requires a different lug material, tongue configuration, or conductor class. Do not assume interchangeability across all breaker, panel, or OEM equipment without confirming approvals.
Best for
Best for electricians and contractors needing a dual-conductor aluminium mechanical lug for service, feeder, or distribution terminations with a one-hole mounting format. It is a practical choice when accommodating larger conductors while keeping field installation straightforward.
Installed in
Typically installed in electrical rooms, service equipment, distribution sections, control enclosures, and other commercial or industrial assemblies where approved mechanical lugs are used. Actual suitability depends on enclosure space, stud size, conductor type, and equipment certification.
Why this product exists
This product provides a field-installable method to land two conductors under one lug body while covering a broad conductor range. Compared with compression lugs, mechanical lugs are commonly chosen where installation speed, serviceability, or conductor flexibility is important.
Compared with similar products
Compared with single-conductor lugs, this two-conductor design allows two conductors to terminate at one point. Compared with two-hole lugs, the one-hole format fits applications where only a single mounting point is available. As a typical buying check, electricians should confirm the required stud or bolt size and whether the equipment calls for one-hole or two-hole termination hardware.
Rule of thumb: mechanical lugs are often selected for field terminations where conductor changes or maintenance access may be needed later. Actual performance depends on installation conditions, conductor type, preparation, oxide inhibitor use where required, torque, and local electrical code.
Specifications
- Product type: Mechanical lug
- Material: Aluminium, tin-plated body commonly listed for this lug style
- Conductor capacity: 6 AWG to 350 kcmil
- Number of conductors: 2
- Mounting style: 1-hole
- Typical voltage class: Up to 600 V for comparable listed mechanical lugs
- Typical mounting hole size for comparable 1-hole lugs in this range: 1/2 in (12.7 mm); verify before ordering
- Application: Power distribution and equipment terminations
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.