- Edmonton Stock: 50
Plug-In Circuit Breaker · 15A 1-Pole 120/240V · 10 kAIC Type QP · Siemens Q115
Q115
12
– Loyalty Rewards
:
from
to
Clear
Clear
Mechanical Lug · 14 AWG to 2/0 AWG · 2-Conductor 1-Hole Aluminium · Techspan L2A2/0
SKU: L2A2/0
Aluminium mechanical lug for terminating one or two copper or aluminium conductors from 14 AWG to 2/0 AWG on a single 1-hole mounting point. Commonly used for panel, grounding, bonding, and distribution terminations where a dual-rated mechanical connector is required.
What this product is for
This Techspan L2A2/0 is a 2-conductor, 1-hole aluminium mechanical lug used to terminate conductors in equipment, panels, enclosures, grounding points, and distribution assemblies. It is intended for copper or aluminium conductors within the listed wire range.
Use for
Use for terminating 14 AWG to 2/0 AWG conductors where a mechanical set-screw lug with a single mounting hole is required. Typical applications include panelboard terminations, bonding points, equipment grounding, and feeder or distribution connections where two conductors may be landed in one listed connector.
Avoid for
Avoid using this lug where a compression connector is specified, where conductor size falls outside the listed range, or where the equipment manufacturer requires a different lug pattern or hole size. Do not assume suitability for fine-stranded or flexible conductors unless the installation listing specifically allows it.
Best for
Best for electricians and panel builders needing a compact dual-rated mechanical lug that can accept up to two conductors and mount with one fastener. It is a practical choice when field serviceability and conductor range flexibility matter.
Installed in
Commonly installed in switchboards, panelboards, control cabinets, wireways, junction boxes, grounding bars, and other electrical equipment with a compatible 1-hole lug mounting location.
Why this product exists
This style of mechanical lug provides a reusable, field-installable termination method without crimp tooling. A wider conductor range can help reduce stocked lug variations on service vehicles and in shop inventory.
Compared with similar products
Compared with single-conductor lugs, this 2-conductor design allows two conductors in one listed connector body. Compared with compression lugs, mechanical lugs are typically faster to install and easier to service in the field, but final selection should follow equipment requirements, conductor type, and code-compliant installation practices.
Specifications
- Product type: Mechanical lug
- Material: Aluminium body
- Conductor range: 14 AWG to 2/0 AWG
- Conductor capacity: 2 conductors
- Mounting: 1-hole
- Stud size: 1/4 in (approximately 6.4 mm)
- Conductor compatibility: Copper and aluminium, dual-rated
- Typical rating found on equivalent listings: 600 V and 90°C
- Application note: Actual suitability depends on conductor class, equipment listing, torque requirements, and local electrical code.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 8
- Edmonton Stock: 10
- Edmonton Stock: 13
- Edmonton Stock: 238
