- Edmonton Stock: 77
:
from
to
Clear
Clear
3.6 w/ft COB LED Strip (Dot-Free) - 283 lm/ft · 2700K · 24V · 16 ft Continuous Light Output
SKU: EV4-COB-IN-16-24-2700
Dot-free COB LED strip for smooth continuous light in indoor accent and task lighting applications. This 24V 16 ft (4.9 m) roll is rated 12 W/m, approximately 3.6 W/ft, with warm 2700K output for millwork, under-cabinet, display, and architectural lighting.
Delivered to you by Sep 10 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
This indoor COB LED strip is used where a smooth, dot-free line of light is required instead of visible diode points. It is suited to under-cabinet runs, shelving, millwork, display lighting, and architectural details where the light source may be seen directly or reflected off finished surfaces.
Use for
- Under-cabinet lighting in kitchens and work areas
- Millwork, shelving, closets, and display cases
- Aluminium channels with diffusers for a cleaner finished installation
- Warm white ambient and accent lighting at 2700K
Avoid for
- Outdoor or wet-location installations unless paired with a product specifically rated for that environment
- Direct connection to line voltage without a compatible 24V driver
- Applications requiring a higher-output strip for primary room lighting over longer runs
Best for
Best for electricians and lighting installers who need a continuous light effect with reduced spotting. COB ribbon is commonly chosen where standard strip light dotting would be visible through shallow channels, reflective finishes, or open sightlines.
Installed in
Typically installed in residential kitchens, built-ins, vanities, closets, retail displays, hospitality millwork, and light commercial feature lighting. This roll is 16 ft (4.9 m) long and includes leads on both ends, with approximately 6 in (152 mm) lead length per end based on distributor listing content.
Why this product exists
This product fills the gap between standard LED ribbon and more complex linear fixtures by providing a cleaner continuous line of light from a flexible strip format. A 24V platform is commonly preferred for LED strip projects because it typically supports longer runs with better voltage-drop control than lower-voltage strip systems. Actual performance depends on run length, driver sizing, layout, and installation conditions.
Compared with similar products
Compared with standard SMD ribbon, this COB strip is selected for its dot-free appearance. Compared with lower-output 8 W/m COB options in the same family, this 12 W/m version is a better fit where more usable light is needed for task-adjacent or brighter accent applications. As a rule of thumb, LED strip around 3 W/ft is commonly used for task and under-cabinet lighting rather than light decorative accents only. Actual results vary by mounting height, channel, diffuser, and surface reflectance.
Specifications
- Manufacturer part number: EV4-COB-IN-16-24-2700
- Brand: Axite Lighting
- Product family: Zero Dot Ribbon / COB LED Strip
- Application: Indoor LED ribbon lighting
- Light output: 283 lm/ft
- Colour temperature: 2700K
- Voltage: 24V
- Power: 12 W/m (approximately 3.6 W/ft)
- Length: 16 ft (4.9 m) roll
- Light effect: Dot-free continuous output
- Typical use: Under-cabinet, millwork, closets, display, architectural accent lighting
- Lead wires: Two leads, approximately 6 in (152 mm) on opposite ends
- BrandAxite Lighting Canada
- Warranty5 year
- Ribbon Lighting
- Watts per Ft12W
- Length16'
- Voltage24V DC
- LED Colour2700K
- CRI90
- CuttableEvery 2 inches
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 119
- Edmonton Stock: 360
- Edmonton Stock: 4
- Edmonton Stock: 9
- Edmonton Stock: 6
- Edmonton Stock: 5
- Edmonton Stock: 4
- Edmonton Stock: 3
- Edmonton Stock: 4
