Remote Head · 410 lm · Single 7W LED · 6V-12VDC · Etlin Daniels ER270SWH-UD7
What this product is for
This single LED remote head is used to extend emergency illumination from a compatible remote-capable emergency lighting unit. It is intended for indoor wall or ceiling mounting where additional light coverage is needed along egress paths, corridors, stair areas, and similar life-safety applications.
Use for
Use for 6V to 12VDC emergency lighting systems that support remote heads and have sufficient remote capacity for a 7W load. Common applications include commercial tenant spaces, service corridors, utility rooms, and exit access routes where one directional head is preferred.
Avoid for
Avoid using this head with non-compatible voltage outputs, non-remote-capable emergency units, or outdoor/wet locations unless the full assembly and installation are specifically rated for that environment. Do not assume compatibility with 24VDC systems.
Best for
Best for indoor emergency lighting layouts that need a single adjustable head with higher output than low-wattage remotes. It is a practical choice when aiming flexibility and a compact thermoplastic housing are required.
Installed in
Typically installed on walls or ceilings, surface-mounted to match a junction box. Commonly used in commercial, institutional, and light industrial interiors across Canada.
Why this product exists
Remote heads let electricians add emergency light where the main unit cannot provide enough coverage on its own. As a rule of thumb, remote heads are selected to match the emergency unit voltage and available watt capacity, and final spacing is typically confirmed against the lighting layout and code requirements. Actual performance depends on mounting height, aiming, obstructions, battery condition, and local electrical code.
Compared with similar products
Compared with 1W remote heads, this 7W model provides substantially more light output for longer throws or higher mounting conditions. Compared with dual-head remotes, this single-head version is better when illumination is needed in one direction only or where a smaller footprint is preferred.
Specifications
- Product type: LED single remote head emergency light
- Brand: Etlin Daniels
- Manufacturer part number: ER270SWH-UD7
- Head configuration: Single adjustable head
- Wattage: 7W
- Lumen output: approximately 410 lm
- Input / system voltage: 6V-12VDC
- Colour: White
- Housing material: High-impact ABS thermoplastic
- Mounting: Wall or ceiling, surface mount, J-box compatible
- Operating temperature: 0°C to 30°C (32°F to 86°F)
- IP rating: IP20
- Certification: cCSAus; CSA 22.2 No. 141 compliant; ICES-005
- Typical dimensions: 5 in x 5 in (127 x 127 mm)
- Alternative toStanpro N1-12-24-7W-LA-WH
- BrandEtlin Daniels
- Warranty5 year
- Lighting Emergency
- Input Volts6V – 12VDC
- Wattage7 WATT 725 LUMEN
- DurationNo Battery
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.