Remote Head · 377 lm · 5W Single LED · 6-12VDC White · Etlin-Daniels ER250SWH-UD5
What this product is for
This single LED remote head is used with compatible 6-12VDC emergency lighting battery units to extend emergency egress illumination. It is suited to commercial, institutional, and light industrial emergency lighting layouts that require a separate remote lamp head.
Use for
Use for adding one remote emergency head to a compatible DC emergency unit, typically in corridors, stairwells, service rooms, exits, and open areas where the battery unit is mounted away from the target coverage area. The adjustable head helps direct light where it is needed during a power failure.
Avoid for
Avoid using this head as a standalone fixture or on incompatible voltage systems. Do not use where a wet-location, vandal-resistant, or high-temperature rated remote head is required unless the full assembly and installation conditions are confirmed to meet project requirements.
Best for
Best for emergency lighting systems needing a compact single-head remote in white thermoplastic with 6-12VDC compatibility. It is a practical choice when one directional head is enough and a dual-head remote is not necessary.
Installed in
Typically installed on wall or ceiling surfaces, with mounting arranged to suit the connected emergency battery unit and branch emergency lighting design. Fixture dimensions are approximately 5 in x 5 in (127 x 127 mm), which helps when matching existing layouts or J-box locations.
Why this product exists
Remote heads let contractors extend emergency lighting coverage beyond the battery unit itself without installing a full additional emergency unit. As a rule of thumb, remote heads are commonly selected to improve light distribution at turns, doorways, and longer egress paths. Actual emergency coverage depends on mounting height, spacing, aiming, and site photometrics.
Compared with similar products
Compared with 1W remote heads, this 5W model provides higher light output for applications needing more punch from a single head. Compared with dual-head versions, this single-head model uses one lamp head and is often chosen where one aiming point is sufficient or where fixture count and load need to be controlled.
Specifications
- Product type: LED single remote head emergency light
- Brand: Etlin-Daniels
- Manufacturer part number: ER250SWH-UD5
- Series: ER250S
- Configuration: Single head
- Lamp wattage: 1 x 5W
- Output power: 5W
- Lumen output: 377 lm
- Voltage: 6-12VDC
- Maximum discharge current: 910 mA
- Colour: White
- Housing: High-impact ABS thermoplastic
- Mounting: Wall or ceiling mount
- Dimensions: approximately 5 in x 5 in (127 x 127 mm)
- Colour temperature: 6000-6500K
- Rating: IP20
- Classification: Class II
- Certification: cCSAus; complies with CSA 22.2 No. 141-15; meets ICES-005 requirements
- Alternative toStanpro N1-06-12-5W-LJ-WH
- BrandEtlin Daniels
- Warranty5 year
- Lighting Emergency
- Input Volts6V – 12VDC
- Wattage5 WATT 400 LUMEN
- DurationNo Battery
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Available to Order | Typically Arrives in 1 - 3 Weeks From Ontario Factory Warehouse34 – Loyalty Rewards
- Edmonton Stock: 7
Running Man Exit Sign · 120/347V · Self-Powered Battery Backup · Ortech OE-126
OE-126
61 – Loyalty Rewards







