150 Watt 24V DC Dimmable Magnetic Driver EM150S24DC
What this product is for
This 150W magnetic LED driver converts 120V AC input to 24V DC output for low-voltage lighting loads that require phase-cut dimming. It is used where electricians need a hardwired power supply for 24V LED strip, tape, or compatible low-voltage fixtures.
Use for
Use for 24V DC LED strip lighting, architectural accent lighting, under-cabinet lighting, cove lighting, and compatible landscape or outdoor low-voltage lighting systems. It is suitable where a magnetic dimmable driver is specified and where indoor/outdoor enclosure protection is required.
Avoid for
Avoid for constant-current LED products, fixtures that require 12V output, or loads exceeding 150W maximum. Do not use where the fixture manufacturer requires a different dimming protocol or a non-magnetic driver type.
Best for
Best for contractors standardizing on 24V constant-voltage systems and needing phase-cut dimming with a hardwired magnetic driver. Also useful where a rugged enclosure and field-installed low-voltage distribution are preferred over plug-in power supplies.
Installed in
Typically installed in residential millwork, kitchens, soffits, exterior accent lighting, commercial display lighting, and other low-voltage lighting layouts. The enclosure is approximately 8.79 in x 4.15 in x 3.41 in (223 x 105 x 87 mm), which helps when planning mounting space on walls, posts, or serviceable locations.
Why this product exists
This driver provides a practical way to run larger 24V lighting loads from a 120V branch circuit while maintaining dimming compatibility and low-voltage output. For LED strip projects, a common rule of thumb is to size the driver with spare capacity rather than loading it to the absolute maximum. Actual performance depends on connected load, run length, dimmer compatibility, installation conditions, and local electrical code.
Compared with similar products
Compared with smaller 24V magnetic drivers, this 150W model supports higher total connected wattage and is better suited to longer strip runs or multi-zone low-voltage layouts. Compared with non-dimmable drivers, it is intended for phase-cut dimming applications. Compared with electronic drivers, magnetic drivers are often selected when the fixture or dimmer specification calls for magnetic low-voltage compatibility.
Specifications
- Manufacturer part number: EM150S24DC
- Brand: Axite Lighting Canada
- Product type: Magnetic LED driver
- Output power: 150W maximum
- Output voltage: 24V DC
- Input voltage: 120V AC, 60 Hz
- Dimming: Magnetic phase-cut dimmable
- Output current: up to 6.2A
- Environment: Indoor/outdoor
- Enclosure: Black powder-coated steel
- Mounting: Wall or post mount
- Protection/certification: Certified to CSA standard C22.2 No. 250.0; conforms to UL 2108
- Warranty: 5 years
- Approximate dimensions: 8.79 in H x 4.15 in W x 3.41 in D (223 x 105 x 87 mm)
- Approximate weight: 8 lb (3.6 kg)
- Watts150W
- FinishBlack
- Mounting TypePost or Wall Mount
- Volts24V DC
- TypeMagnetic
- LocationOutdoor
- Height8.79"
- Width4.15"
- Depth3.41"
- BrandAxite Lighting Canada
- Warranty5 year
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Available For Backorder361 – Loyalty Rewards
- Edmonton Stock: 2
- Edmonton Stock: 5
- Edmonton Stock: 4
- Edmonton Stock: 7
Shallow LED Aluminum Channel · 8 ft (2.44 m) · Opal Lens · Axite Lighting SLC-002S
SLC-002S
Restocking38 – Loyalty Rewards- Edmonton Stock: 3
- Edmonton Stock: 8










