Magnetic LED Driver · 150W 12V DC · Phase Dimmable · Axite Lighting Canada EM150S12DC
What this product is for
This magnetic LED driver converts 120V AC line voltage to 12V DC constant-voltage output for compatible low-voltage LED lighting systems. It is intended for applications that need a 150W dimmable hardwired power supply, including LED strip lighting, undercabinet lighting, cove lighting, and other 12V DC fixtures.
Use for
- 12V DC constant-voltage LED strip and tape light systems
- Phase-dimmable low-voltage LED lighting on 120V circuits
- Residential and light commercial installations
- Hardwired driver replacements where a magnetic dimmable driver is specified
Avoid for
- Fixtures that require constant-current LED drivers
- 24V DC lighting systems
- Applications exceeding the 150W maximum load
- Installations where the connected dimmer is not suitable for low-voltage magnetic loads
Best for
Best for electricians and lighting installers who need a 12V DC magnetic driver for phase-dimmed LED loads. It is a practical choice where compatibility with magnetic low-voltage dimming is preferred over electronic driver designs.
Installed in
Typically installed in millwork, display lighting, undercabinet runs, coves, soffits, and other indoor low-voltage lighting layouts. The enclosure size is approximately 8 x 4.1 x 3.24 in (203 x 104 x 82 mm), which can help when planning accessible mounting space.
Why this product exists
Low-voltage LED systems need a compatible power supply that matches fixture voltage and dimming method. This model provides 12V DC output from a 120V AC supply and supports phase dimming with low-voltage magnetic dimmers, making it suitable for many legacy and specification-grade dimming layouts.
Compared with similar products
Compared with non-dimmable drivers, this unit is intended for installations where light level control is required. Compared with 24V drivers, it is for 12V DC systems only. Compared with electronic drivers, magnetic drivers are commonly selected where magnetic low-voltage dimmer compatibility is important. As typical guidance, many installers leave headroom rather than loading a driver to 100% of nameplate capacity. Actual performance depends on installation conditions, connected load, dimmer compatibility, and local electrical code.
Specifications
- Manufacturer part number: EM150S12DC
- Brand: Axite Lighting Canada
- Product type: Magnetic LED driver
- Input voltage: 120V AC, 60 Hz
- Output voltage: 12V DC
- Maximum load: 150W
- Dimming: Phase dimmable / low-voltage magnetic dimmer compatible
- Class: Class 2
- Case quantity: 6
- Approximate dimensions: 8 x 4.1 x 3.24 in (203 x 104 x 82 mm)
- Typical application: 12V DC LED strip and low-voltage lighting
- Watts150W
- FinishBlack
- Mounting TypePost or Wall Mount
- Volts12V DC
- TypeMagnetic
- LocationOutdoor
- Height8.79"
- Width4.15"
- Depth3.41"
- BrandAxite Lighting Canada
- Warranty5 year
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Available For Backorder296 – Loyalty Rewards
- Edmonton Stock: 8
- Edmonton Stock: 3
MT-0-BLK Axite Landscape Lighting Monet Spot Light 12V MR16 Black-Made In Canada
MT-0-BLK
Back in stock June 15th 2026105 – Loyalty Rewards- Edmonton Stock: 3
- Edmonton Stock: 20
MLE150-12DC-UD AXITE LIGHTING 150W 12V DIMMABLE 5 IN 1 LED DRIVER
MLE150-12DC-UD
Available For Backorder361 – Loyalty Rewards300 Watt 12V DC Dimmable Magnetic Driver EM300S12DC
EM300S12DC
Available For Backorder407 – Loyalty Rewards












