Industrial ceiling fan · 60 in blade sweep · DC motor weatherproof white · Canarm CP60DW11N
What this product is for
This 60 in (1524 mm) weatherproof industrial ceiling fan is used to move air in industrial, commercial, agricultural, and covered outdoor spaces where moisture resistance is important. It combines a DC motor with a 3-blade metal fan assembly for efficient air circulation.
Use for
Use for warehouses, workshops, barns, greenhouses, service areas, covered patios, and other large spaces needing steady air movement. It is suited to installations where a white finish, downrod mounting, and reversible airflow are required.
Avoid for
Avoid using this fan where a fully sealed washdown-rated fan is required, or where the installation is exposed to conditions beyond its weatherproof, water-resistant design. Do not assume it includes a standard wall switch setup; this model requires the compatible Canarm wall control for operation.
Best for
Best for buyers who need a large-diameter industrial fan with lower energy draw than typical AC industrial fans, plus forward and reverse operation for seasonal airflow control. It is also a fit where quieter operation and reduced motor weight are useful on site.
Installed in
Typically installed on ceilings in commercial and industrial buildings using the included 1 in x 16 in downrod. The overall installed height is commonly around 27 in (686 mm), subject to ceiling structure and mounting conditions.
Why this product exists
This product exists for applications that need broad air movement from a 60 in (1524 mm) fan while reducing energy consumption compared with conventional industrial AC fans. For trade planning, large industrial ceiling fans are commonly selected to improve perceived comfort and air mixing rather than provide exact temperature reduction. Actual airflow performance depends on mounting height, obstructions, building layout, and local electrical code.
Compared with similar products
Compared with smaller 48 in or 56 in industrial fans, this 60 in model covers a wider blade sweep and is typically chosen where more open floor area or higher-volume air movement is needed. Compared with non-weatherproof versions, this model adds water-resistant construction details such as gasketed components and stainless screws for damp or semi-exposed locations.
Specifications
- Manufacturer: Canarm
- Manufacturer part number: CP60DW11N
- Product family: DC Industrial Fan
- Product type: Weatherproof industrial ceiling fan
- Blade sweep: 60 in (1524 mm)
- Colour/finish: White
- Motor type: DC
- Number of blades: 3 straight metal blades
- Mounting: Downrod mount
- Downrod size: 1 in x 16 in (25 x 406 mm)
- Voltage: 120V
- Frequency: 60 Hz
- Current: 0.6A
- Speed: 270 rpm
- Airflow: approximately 8,944 CFM
- Efficiency: approximately 259 CFM/W
- Operation: Forward and reverse
- Weather resistance: High-performance weatherproof, water-resistant construction
- Compliance: NRCan and DOE compliant
- Shipping weight: approximately 18.5 lb (8.4 kg)
- Control requirement: Compatible Canarm RREM-DCQ014-W wall control required
- BrandCanarm
- Warranty5 year
- Dimensions
- Diameter60"
- Height from Ceiling16"
- Characteristics
- Number of Blades3
- Housing ColorWhite
- Blade ColorWhite
- RemoteRequired - sold separately
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Available to Order | Typically Arrives in 1 - 3 Weeks From Ontario Factory22 – Loyalty Rewards




