- Edmonton Stock: 115
Bathroom Exhaust Fan · 110 CFM · 1.0 Sone · 4 in Duct Connection · Canarm BPT18-34A-1
What this product is for
This bathroom exhaust fan is designed to remove humid air from residential washrooms and help control condensation, fogged mirrors, and moisture buildup. It is a ceiling-mount unit with 110 CFM airflow, a 1.0 sone sound rating, and a 4 in (102 mm) duct connection.
Use for
Use for standard bathroom exhaust applications where you need a quiet fan with moderate airflow. It is commonly used in bathrooms up to approximately 105 sq ft (9.8 m²), based on published product sizing guidance. A typical rule of thumb is to size bathroom fans to the room and duct layout, especially where longer duct runs or elbows add static pressure.
Avoid for
Avoid using this fan where a higher-capacity unit, integrated light, heater, humidity sensor, or larger duct connection is required. It may also be a poor fit for oversized bathrooms, high-static duct runs, or retrofit situations that require a different housing size or discharge size.
Best for
Best for contractors and homeowners replacing or installing a basic ceiling bathroom fan where low noise and standard 120 V wiring are required. This model suits projects needing a 4 in (102 mm) ducted exhaust fan without an integrated light.
Installed in
Typically installed in residential bathrooms, powder rooms, and similar moisture-prone spaces. The housing dimensions are approximately 10.2 x 10.2 x 8.0 in (25.9 x 25.9 x 20.3 cm), with a ceiling opening of about 10.8 x 10.5 x 8.5 in (27.4 x 26.7 x 21.6 cm).
Why this product exists
This product exists to provide code-conscious bathroom ventilation in a compact ceiling-mount format. It helps exhaust moist air to reduce the risk of mildew and surface moisture issues in everyday residential applications.
Compared with similar products
Compared with lower-CFM bath fans, this 110 CFM model is better suited to medium-size bathrooms. Compared with higher-end ECM or ultra-quiet models, it is a more straightforward AC-motor fan for standard installations. As a buying guide, quieter fans are typically preferred where the fan will run longer, while higher CFM models are commonly selected for larger rooms or more demanding duct runs. Actual performance depends on installation conditions, insulation, layout, and local electrical code.
Specifications
- Manufacturer part number: BPT18-34A-1
- Brand: Canarm
- Product type: Bathroom exhaust fan
- Mounting: Ceiling mount
- Airflow: 110 CFM
- Sound rating: 1.0 sone
- Voltage: 120 V
- Frequency: 60 Hz
- Power consumption: 35 W
- Duct diameter: 4 in (102 mm)
- Housing dimensions: 10.2 x 10.2 x 8.0 in (25.9 x 25.9 x 20.3 cm)
- Ceiling opening: 10.8 x 10.5 x 8.5 in (27.4 x 26.7 x 21.6 cm)
- Weight: 10.78 lb (4.9 kg)
- Grille style: Low-profile grille
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
Bathroom Exhaust Fan · 70 CFM · 1.0 Sone · 4 in Duct · Canarm BPT12-13H
BPT12-13H
Available to Order | Typically Arrives in 1 - 3 Weeks From Ontario Factory90 – Loyalty Rewards- Edmonton Stock: 993
- Edmonton Stock: 204
- Edmonton Stock: 1345
- Stocking Transition · Limited Availability
- Edmonton Stock: 2
- 2% off trade













