- Edmonton Stock: 370
:
from
to
Clear
Clear
Electronic countdown timer · 120V · 1/2/4/8-hour presets with hold · Intermatic EI220W
SKU: EI220W
In-wall electronic countdown timer for 120V single-pole control of lights, fans and other compatible loads. Offers 1, 2, 4 and 8 hour presets with a hold function, silent operation, and a neutral-required design for decorator-style wall box installations.
What this product is for
The Intermatic EI220W is an in-wall electronic countdown timer for automatically turning connected loads off after a selected run time. It is commonly used for lighting, exhaust fans and similar 120V single-pole loads where automatic shut-off helps reduce unnecessary run time.
Use for
Use for bathroom fans, indoor lighting, utility room loads, and other compatible 120V circuits that benefit from 1, 2, 4 or 8 hour countdown control. The hold function allows the load to remain ON when timed shut-off is not wanted.
Avoid for
Do not use for sunlamps, saunas, or loads that could cause personal injury or unsafe conditions if timed incorrectly. Confirm load type and rating before ordering, especially for motor, ballast and incandescent loads.
Best for
Best for residential and light commercial spaces where silent operation is preferred over a mechanical spring-wound timer. It suits retrofit work in standard wall boxes with decorator wall plates and is a practical choice where occupants need simple push-button countdown control.
Installed in
Installed in a standard single-gang wall box on 120 VAC circuits. The timer is designed for wall mounting and fits decorator-style wall plates. Body size is approximately 2.79 in H x 1.75 in W x 1.44 in D (71 x 44 x 37 mm).
Why this product exists
This timer provides a straightforward way to limit run time without programming schedules. For electricians and maintenance staff, that means a simple auto-off control for fans and lighting in washrooms, utility areas and similar spaces where loads are often left running longer than needed.
Compared with similar products
Compared with mechanical countdown timers, the EI220W operates silently and uses preset electronic timing with a single-button interface. Compared with shorter-range countdown models, this version is better suited to applications needing longer run times up to 8 hours. A typical buying check is whether the circuit has a neutral available, since this model requires one. Actual suitability depends on load type, wiring method and local electrical code.
Specifications
- Manufacturer part number: EI220W
- Brand: Intermatic
- Product family: EI200 Series electronic countdown timers
- Type: In-wall electronic countdown timer
- Voltage: 120 VAC, 50/60 Hz
- Operation: Single-pole, SPST
- Preset times: 1, 2, 4, 8 hours
- Hold function: Yes
- Colour: White
- Amperage rating: 15 A
- Maximum wattage: 1800 W
- Neutral required: Yes
- Applications: Lighting, fans, HVACR and other compatible indoor loads
- Mounting: Wall mount, standard wall box
- Wall plate style: Decorator
- Material: Thermoplastic
- Operating temperature: 32 to 104°F (0 to 40°C)
- Certifications: cULus, RoHS
- Warranty: Limited 1 year
- Status: Discontinued by manufacturer
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 1461
- Edmonton Stock: 918
- Edmonton Stock: 1629
- Edmonton Stock: 59
