- Stock in BC
Square Anchor Plate · 16-1/4 x 16-1/4 in (413 x 413 mm) · Hot-Dip Galvanized 250 in² Area · Hydel 250SAP
250SAP
100
– Loyalty Rewards
Anchor Rod · 6 ft x 5/8 in (1.8 m x 16 mm) · Double Thimble Eye · Hydel 658ADT
Pole line anchor rod for guying and anchoring applications, with a 6 ft length and 5/8 in diameter double thimble eye design. Commonly used in utility and distribution work where a double thimble rod is specified; actual assembly and load suitability depend on anchor type, soil conditions, installation method, and local utility standards.
What this product is for
The Hydel 658ADT is a pole line anchor rod used in overhead distribution and utility anchoring assemblies. It is a 6 ft (1.8 m) long, 5/8 in (16 mm) diameter threaded anchor rod with a double thimble eye for use where that rod style is specified.
Use for
- Guying and anchoring assemblies in pole line hardware systems
- Utility and electrical distribution projects requiring a double thimble anchor rod
- Installations matched to the correct anchor, nut, and hardware set
Avoid for
- Applications where a different rod diameter or length is required
- Installations requiring a single thimble eye rod instead of double thimble
- Any assembly where engineering, utility standards, or site conditions call for another anchor system
Best for
Best for contractors and utility buyers replacing or specifying a 5/8 in x 6 ft double thimble anchor rod in Canadian pole line work. This format helps when matching existing hardware schedules and standard utility material lists.
Installed in
Typically installed as part of an outdoor pole line anchoring system. Manufacturer literature indicates these rods are manually installed by inserting a 1 in rod into the eye and turning the anchor assembly. Installation practice should follow the applicable utility standard and site requirements.
Why this product exists
This product provides the threaded rod section and eye configuration needed to connect anchor hardware in guying systems. The double thimble eye style is used where that specific connection detail is required by the assembly design.
Compared with similar products
Compared with Hydel AST models, the 658ADT uses a double thimble eye rather than a single thimble eye. Compared with longer 7 ft or 8 ft rods, this 6 ft model is selected when the bill of materials or utility standard calls for the shorter rod length. Always match rod style, diameter, and length to the specified anchor assembly.
Specifications
- Brand: Hydel
- Manufacturer part number: 658ADT
- Product type: Threaded anchor rod
- Product family: Pole line hardware
- Rod style: Double thimble eye (ADT)
- Length: 6 ft (1.8 m)
- Diameter: 5/8 in (16 mm)
- Material/finish: Galvanized steel
- Application: Pole line anchoring and guying assemblies
- Compliance note: Listed in Hydel pole line catalogue; verify project-specific utility and CSA requirements before ordering
Typical guidance only: anchor rod selection is commonly based on the full assembly design, soil conditions, and utility standards. Actual performance depends on installation conditions, hardware pairing, and local electrical or utility code requirements.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
15 In British Columbia Warehouse As Of April 22 2026- Stock in BC
Guy Wire Guard · 2 m (6.6 ft) · Yellow Polyethylene Visibility Cover · Hydel 2YG
2YG
32 – Loyalty Rewards- Stock in BC
Guy Strain Insulator · 4-1/4 in (108 mm) · Porcelain Wet-Process · Hydel 504WGS
504WGS
53 In British Columbia Warehouse As Of April 22 202622 – Loyalty Rewards- Stock in BC
Guy Hook · 6 in (152 mm) Length · 13/16 in Mounting Hole · Galvanized Ductile Iron · Hydel 34GH
34GH
103 In British Columbia Warehouse As Of April 22 202623 – Loyalty Rewards- Stock in BC
Guy End Grip · 5/16 in x 30 in (7.9 mm x 762 mm) · Galvanized Steel, 11,150 lb Rated · Hydel 3016GE
3016GE
209 In British Columbia Warehouse As Of April 22 202611 – Loyalty Rewards
