- Stock in BC
Stack Clamp Assembly · 5/8 in x 10 in thru-bolt · For concrete or brick mast mounting · Hydel 2504-BC
2504-BC
47
– Loyalty Rewards
:
from
to
Clear
Clear
Triplex Cable Rack · 200A · Heavy-Duty with Insulator · Hydel 2517U
SKU: 2517U
Heavy-duty 200A triplex cable rack with insulator for service entrance and secondary support applications. Porcelain and steel construction, commonly specified where a spool rack is needed for overhead triplex cable support; actual suitability depends on utility requirements, installation method, and local electrical code.
What this product is for
The Hydel 2517U is a heavy-duty triplex cable rack with insulator used in pole line and service entrance applications. It is intended to support overhead triplex cable where a 200A spool rack assembly is specified.
Use for
- 200A service entrance mast and rack assemblies
- Triplex cable support at residential or light commercial service points
- Replacement of existing heavy-duty spool rack hardware where matching form and rating matter
Avoid for
- Applications requiring a different rack style, utility-specific fitting, or alternate mounting geometry
- Installations where a complete mast kit or additional service hardware is required but not included
- Use without confirming local utility and code acceptance
Best for
Best for electricians and utility-facing contractors sourcing a replacement or specified 200A heavy-duty triplex cable rack with insulator from a known Canadian manufacturer.
Installed in
Typically installed on service entrance mast assemblies and related overhead service support points. Distributor references also indicate use with 2-1/2 in mast service applications, which is a common pairing to verify before ordering.
Why this product exists
This product provides a ready heavy-duty rack and insulator assembly for supporting triplex conductors at the service point, reducing the need to source separate compatible components.
Compared with similar products
Compared with lighter-duty spool racks, the 2517U is positioned as a 200A heavy-duty model. Hydel catalogue references distinguish it from the 2518U 100A light-duty version, making it the better fit where a heavier service rack is specified.
Specifications
- Manufacturer: Hydel
- Manufacturer part number: 2517U
- Product type: Triplex cable rack with insulator
- Amperage rating: 200A
- Duty: Heavy-duty
- Type: Clamp-on
- Materials: Porcelain and steel
- Certifications/listings: CSA Certified, UL Listed
- Typical application: Overhead triplex cable support for service entrance hardware
- Typical pairing guidance: Commonly used in 200A mast assemblies; verify mast size, utility standard, and mounting details before purchase
Typical guidance only. Actual performance and suitability depend on installation conditions, conductor arrangement, utility requirements, and local electrical code.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
289 In British Columbia Warehouse As Of July 3rd, 2026- Edmonton Stock: 19
- Stock in BC
- Stock in BC
Poleline Spool Clevis · 3-1/4" W x 3" L · Galvanized Steel (Insulator Extra) · Hydel 314CLU
314CLU
223 In British Columbia Warehouse As Of July 3rd, 202623 – Loyalty Rewards
