- Edmonton Stock: 1379
NMD90 Two-Screw Saddle Connector · 1/2 in Trade Size · Zinc · Hubbell NMC038
Zinc two-screw saddle connector for securing NMD90 cable or flexible cord to steel outlet boxes and other metal enclosures through a 1/2 in trade size knockout. Commonly used where a simple mechanical clamp is needed for residential and light commercial box terminations.
Delivered to you by May 21 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
The Hubbell NMC038 is a two-screw saddle connector used to secure NMD90 cable or flexible cord to steel outlet boxes and other metal enclosures. It is a zinc connector sized for a 1/2 in trade size knockout.
Use for
Use for terminating non-metallic sheathed cable into metal boxes, cabinets, and enclosures where a mechanical cable clamp is required. Suitable for residential wiring, renovation work, and light commercial branch circuit installations.
Avoid for
Avoid using where a non-metallic snap-in style connector is specifically preferred, where wet-location fittings are required, or where the cable type and box arrangement do not match the connector listing. Do not assume conductor capacity beyond the product listing.
Best for
Best for electricians who want a familiar two-screw metal connector for NMD90 cable terminations into steel boxes. It is a practical choice for standard rough-in and service work where box knockouts are already provided.
Installed in
Typically installed in steel outlet boxes, junction boxes, panel-related metal enclosures, and similar box terminations using a 1/2 in trade size knockout. 1/2 in is approximately 12.7 mm.
Why this product exists
This connector provides strain relief and edge protection where NMD90 cable enters a metal box. The two-screw saddle design gives a straightforward clamp style that many electricians use for secure cable entry on standard box work.
Compared with similar products
Compared with snap-in non-metallic NMD connectors, this style uses a metal body and two screws for clamping. It is commonly chosen when installers want a traditional saddle connector for metal boxes. As typical trade guidance, connector selection should match the cable type, knockout size, and box construction. Actual suitability depends on installation conditions and local electrical code.
Specifications
- Manufacturer: Hubbell
- Series/Sub-brand: TradeSELECT
- Manufacturer part number: NMC038
- Product type: Two-screw saddle connector
- Trade size: 1/2 in (12.7 mm)
- Alternate trade reference shown by some sources: 3/8 in trade designation
- Material: Zinc
- Application: Fix non-metallic sheathed cable and flexible cord to steel outlet boxes or other metal enclosures
- Certifications: CSA or cUL/UL listed depending on source listing format
- Packaging: 100 per carton, 1000 per case
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 311
- Edmonton Stock: 273
- Edmonton Stock: 1512
- Edmonton Stock: 5
