- Edmonton Stock: 4328
:
from
to
Clear
Clear
BX/Flex Squeeze Connector · 1-1/4 in · Straight Zinc Die-Cast · Global SQC125
SKU: SQC125
1-1/4 in straight squeeze connector for terminating BX, flexible metal conduit, or similar armoured cable to a steel box or metal enclosure. Zinc die-cast construction with a single-screw squeeze style makes it a typical choice for indoor cable-to-box terminations; actual fit depends on cable outside diameter and enclosure type.
Delivered to you by Jul 26 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
This 1-1/4 in straight squeeze connector is used to secure BX or flexible metal conduit to a steel outlet box, panel, load centre, or other metal enclosure. It is a mechanical termination fitting for indoor cable-to-box connections where a straight connector is required.
Use for
Use for 1-1/4 in trade size BX/flex cable terminations into metal enclosures. Commonly used where electricians need a simple straight connector with zinc die-cast body construction and screw-tightened squeeze retention.
Avoid for
Avoid using this fitting where a 90-degree connector is needed, where a liquidtight fitting is required, or where the cable outside diameter does not match the connector range. Do not assume suitability for wet locations unless the listing specifically states it.
Best for
Best for indoor commercial and residential rough-in or retrofit work using armoured cable or flexible metallic conduit into metal boxes and cabinets. A squeeze-style connector is typically chosen when a straightforward mechanical clamp connection is preferred.
Installed in
Typically installed in steel outlet boxes, junction boxes, cabinets, and similar metal enclosures. Trade size is 1-1/4 in (approximately 32 mm).
Why this product exists
It provides a code-oriented mechanical transition between cable and enclosure while helping protect the cable at the entry point and keeping the wiring method properly secured.
Compared with similar products
Compared with two-screw connectors, a one-screw or squeeze-style connector is a simpler fastening style for the same general application. Compared with 90-degree fittings, this straight connector is better where there is enough entry clearance in front of the knockout. Typical buying check: confirm trade size, connector style, and cable outside diameter before ordering.
Specifications
- Product type: Straight squeeze connector
- Trade size: 1-1/4 in (approximately 32 mm)
- Application: BX/flexible metal conduit to metal box or enclosure
- Material: Zinc die-cast
- Configuration: Straight
- Connection style: Single-screw squeeze type
- Installation location: Indoor, where permitted by code and product listing
- Buying note: Cable fit is typically based on outside diameter range, not trade size alone
Typical guidance only: always verify cable diameter, enclosure knockout, and local code requirements before installation.
- Type90 Degree
- Number of Screws1 Screw Connector
- Trade Size1-1/4"
- ApplicationDry
- BrandGlobal
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 2811
- Edmonton Stock: 762
- Edmonton Stock: 7
