PVC Male Terminal Adapter · 2-1/2 in Trade Size · Grey Rigid PVC · Royal RTA40
What this product is for
The Royal RTA40 is a 2-1/2 in rigid PVC male terminal adapter used to terminate PVC conduit and provide a threaded connection at boxes, cabinets, or other fittings. It is designed for electrical conduit systems where a non-metallic, corrosion-resistant transition is required.
Use for
Use for rigid PVC conduit runs entering junction boxes, service entrance equipment, cabinets, or enclosures. It is also used where a solvent-weld PVC connection on one side and a threaded termination on the other side helps complete the raceway neatly and securely.
Avoid for
Avoid using this fitting where the conduit system, thread type, or fitting size does not match the installation. Do not use it as a substitute for fittings intended for different conduit materials or for applications outside the product approval and local code requirements.
Best for
Best for electricians and contractors installing rigid non-metallic conduit in commercial, industrial, utility, and service-entry applications where corrosion resistance and a clean box termination matter.
Installed in
Typically installed in indoor or outdoor PVC conduit systems, including service entrances, junction boxes, pull boxes, control panels, and equipment enclosures. Grey PVC construction is commonly selected for exposed or concealed electrical raceway systems.
Why this product exists
This fitting exists to adapt 2-1/2 in PVC conduit to a male threaded termination point while keeping the raceway non-corrosive and electrically non-conductive. Compared with improvised transitions, a purpose-made terminal adapter helps maintain fit, alignment, and code-compliant installation practice.
Compared with similar products
Compared with a standard coupling, a terminal adapter provides a threaded end for box or fitting termination rather than a straight solvent-weld join. Compared with metallic fittings, rigid PVC helps resist rust and corrosion in damp or corrosive environments. As a typical conduit-planning rule of thumb, larger trade sizes such as 2-1/2 in are commonly chosen where conductor count or conductor size requires more raceway capacity; actual conduit fill depends on conductor type, insulation, bending requirements, and local electrical code.
Specifications
- Manufacturer part number: RTA40
- Brand: Royal
- Product type: Rigid PVC conduit terminal adapter, male
- Trade size: 2-1/2 in (63.5 mm nominal)
- Material: PVC
- Colour: Grey
- Approval: CSA/UL approved
- Connection style: Solvent-weld socket x male threaded termination
- Typical application: Service entrances, junction boxes, and enclosure entries
- Catalogue dimensions from manufacturer literature: A 1.900 in (48.3 mm), B 0.800 in (20.3 mm), inside diameter 2.346 in (59.6 mm), thread 2.930 in (74.4 mm)
- Carton quantity: 25
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Available to Order | Typically Arrives in 1 - 3 Weeks Ships from Abbotsford BC Factory8 – Loyalty Rewards
- Edmonton Stock: 5
Rigid PVC Duct Solvent Cement · 250 mL · EcoVOC Clear Formula · Royal RVOC250
RVOC250
22 – Loyalty Rewards- Edmonton Stock: 2
- Edmonton Stock: 20
- Edmonton Stock: 52
Circuit Breaker · 15A 1-Pole 120/240V AC · Plug-In Thermal-Magnetic Q-Line 10 kAIC · ABB THQL1115
THQL1115
Available to Order | Typically Arrives in 1 - 3 Weeks10 – Loyalty Rewards













