- Edmonton Stock: 5
:
from
to
Clear
Clear
PVC Service Entrance Cap · 1-1/4 in Trade Size · For Rigid PVC Conduit · Royal REF25
SKU: REF25
1-1/4 in PVC service entrance cap for rigid PVC conduit runs where conductors enter a building or enclosure. Commonly used to help shield the conduit entry from weather exposure; verify fit and installation method with the conduit system and local electrical code.
Delivered to you by Aug 22 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
This PVC service entrance cap is used on 1-1/4 in trade size rigid PVC conduit to finish the top of a service entrance raceway where conductors exit the conduit. It is intended for electrical service entrance applications using compatible rigid PVC conduit systems.
Use for
Use for overhead service entrance raceways, mast or riser terminations, and other conduit entries where a listed PVC service entrance fitting is specified. Suitable where a non-metallic fitting is preferred to match a PVC conduit run.
Avoid for
Avoid using this as a general solvent-weld end cap or as a substitute for a different conduit fitting type. Do not use where the trade size, conduit type, or utility/service requirements do not match the installation.
Best for
Best for electricians and contractors installing 1-1/4 in (32 mm nominal) rigid PVC conduit service entrances and looking for a matching Royal / Westlake fitting in a Canadian PVC conduit system.
Installed in
Typically installed on residential, agricultural, and light commercial service entrance conduit runs. Final application depends on the service layout, conductor arrangement, utility requirements, and local code.
Why this product exists
It provides a purpose-built termination for service entrance conduit so conductors can exit the raceway at the top of the run with a fitting designed for that application, rather than using a standard cap or improvised termination.
Compared with similar products
Compared with a standard PVC end cap, a service entrance cap is made specifically for conductor exit at the top of the conduit. Compared with metal entrance caps, this PVC version is typically chosen to stay consistent with rigid PVC conduit systems and non-metallic fittings.
Specifications
- Manufacturer part number: REF25
- Brand: Royal
- Manufacturer: Westlake Pipe & Fittings / Royal Pipe Systems
- Product type: Service entrance fitting / entrance cap
- Trade size: 1-1/4 in
- Approximate metric trade equivalent: 32 mm
- Material: PVC
- Colour: Gray
- For use with: Rigid PVC conduit
- Approximate dimensions: 2.83 in L x 4.78 in W x 3.25 in H (72 x 121 x 83 mm)
- Approval notes: CSA/UL approved listings are referenced by distributor sources; confirm project-specific certification requirements before purchase.
Typical buying guidance: choose the same trade size as the conduit run, and confirm the fitting style required by the service design and utility standard. Actual suitability depends on conductor size, service layout, weatherhead orientation, and local electrical code.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 5
Rigid PVC Duct Solvent Cement · 250 mL · EcoVOC Clear Formula · Royal RVOC250
RVOC250
22 – Loyalty RewardsPVC Meter Hub · 1-1/4 in · For Rigid PVC Conduit · Westlake Pipe & Fittings MHU25
RMHU25
Available to Order | Typically Arrives in 1 - 3 Weeks Ships from Abbotsford BC Factory4 – Loyalty Rewards- Edmonton Stock: 57
- Edmonton Stock: 4
- Edmonton Stock: 10
- Edmonton Stock: 30
