Weatherproof Blank Cover · 2-Gang Flat PVC with Gasket · Gray · Royal Pipe Systems RBRC20-2
RBRC20-2
4
– Loyalty Rewards
2-Gang PVC Cover Plate · Double Duplex Receptacle · Flat F Series Style · Royal RDRC20-2
2-gang PVC flat cover plate for double duplex receptacle layouts in Royal rigid PVC box and fitting systems. Commonly used where a non-metallic cover is preferred for corrosion resistance in damp or outdoor-adjacent installations; verify box, gasket and device compatibility before ordering.
What this product is for
This 2-gang PVC cover plate is designed for double duplex receptacle configurations in Royal rigid PVC electrical box systems. It is part of the F Series style cover plate range and is used where a flat non-metallic cover is required over a compatible 2-gang box.
Use for
Use for mounting and finishing two duplex receptacles on compatible PVC boxes in commercial, industrial, utility and corrosive environments. PVC covers are commonly selected where electricians want a non-conductive, non-corroding alternative to metal covers.
Avoid for
Avoid using this cover where a weatherproof while-in-use cover is required, where the box pattern does not match the cover, or where the installation calls for a gasketed or extra-duty cover assembly. Do not assume weatherproof performance unless the full listed box, gasket and cover assembly is specified for that use.
Best for
Best for 2-gang PVC box assemblies needing a flat cover for two duplex receptacles, especially in washdown, corrosive or outdoor-adjacent areas where non-metallic materials are preferred.
Installed in
Typically installed on compatible 2-gang PVC device boxes in exposed conduit systems, service areas, agricultural buildings, light industrial spaces and other locations where rigid PVC conduit systems are used. Actual suitability depends on the enclosure, gasketing, orientation and local electrical code.
Why this product exists
This cover provides a matching non-metallic face for Royal PVC box systems so electricians can complete a double duplex receptacle installation without introducing a metal cover into a PVC raceway assembly. That can simplify material matching in corrosive environments and help maintain a consistent non-metallic system.
Compared with similar products
Compared with blank covers, this model is specifically opened for two duplex receptacles. Compared with gasketed or weatherproof covers, this is a flat device cover and should be selected only when the installation details match that style. As a rule of thumb, choose a weatherproof or while-in-use cover instead when receptacles are exposed to direct wet-location conditions. Actual performance depends on installation conditions, enclosure selection and local code.
Specifications
- Product type: PVC cover plate
- Gang size: 2-gang
- Device configuration: Double duplex receptacle
- Style: Flat cover, F Series style
- Material: PVC, non-metallic
- Brand: Royal
- Manufacturer part number: RDRC20-2
- System context: Royal/Westlake rigid PVC electrical products
- Typical installation: Compatible 2-gang PVC box assemblies
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
Available to Order | Typically Arrives in 1 - 3 Weeks Ships from Abbotsford BC FactoryPVC double-gang cover plate · 2 toggle switch openings · F Series flat cover · Royal Pipe Systems RTSC20-2
RTSC20-2
Available to Order | Typically Arrives in 1 - 3 Weeks Ships from Abbotsford BC Factory3 – Loyalty Rewards- Edmonton Stock: 3
Weatherproof PVC Cover Plate · 2-Gang · 1 Plunger Switch + 1 Decora/GFCI Flip Lid · Royal RVSRC20-2
RVSRC20-2
Available to Order | Typically Arrives in 1 - 3 Weeks Ships from Abbotsford BC Factory27 – Loyalty Rewards- Edmonton Stock: 5
Rigid PVC Duct Solvent Cement · 250 mL · EcoVOC Clear Formula · Royal RVOC250
RVOC250
22 – Loyalty Rewards
