Clamp Meter · 1000A AC/DC True RMS · TightSight dual display · IDEAL 61-775
What this product is for
The IDEAL 61-775 is a 1000A AC/DC True RMS clamp meter for electricians, maintenance teams, and contractors who need current measurements on live conductors without breaking the circuit. It is designed for commercial and industrial testing, especially where panel space is tight or visibility is limited.
Use for
- Measuring AC/DC current up to 1000A
- Checking AC voltage up to 750V and DC voltage up to approximately 1000V
- Troubleshooting motors, feeders, panels, and adjustable speed drives
- Taking readings in confined spaces using the TightSight bottom display
- Verifying continuity, resistance, capacitance, and frequency during service work
Avoid for
- Applications requiring an IP-rated meter for wet or washdown environments
- Very small electronics work where a compact multimeter is more suitable
- Jobs that require a documented drop rating, as a drop-protection value was not confirmed from the manufacturer page reviewed
Best for
Best for commercial and industrial electricians who need a higher-amperage clamp meter with AC/DC capability, True RMS accuracy, and safer line-of-sight reading in energized equipment. The 2 in (51 mm) jaw opening is useful when working around larger conductors.
Installed in
Typically used in service panels, distribution equipment, MCCs, industrial machinery, HVAC equipment, and maintenance environments. Commonly chosen for troubleshooting branch circuits, feeders, and motor loads.
Why this product exists
This meter exists for electricians who need to read current safely in hard-to-reach locations. IDEAL's TightSight display places a second reading position at the bottom of the meter so the user can keep their head farther from the panel while taking measurements.
Compared with similar products
Compared with lower-range clamp meters, the 61-775 adds 1000A AC/DC capacity and a larger 2 in (51 mm) jaw for bigger conductors. It also includes True RMS measurement for more accurate readings on non-sinusoidal loads, which is useful around drives and other electrically noisy equipment. As a typical buying rule of thumb, True RMS meters are commonly preferred for commercial and industrial troubleshooting where waveform distortion may affect standard averaging meters. Actual readings depend on circuit conditions and proper meter use.
Specifications
- Manufacturer part number: 61-775
- Brand: IDEAL
- Product family: TightSight clamp meter
- Type: Digital clamp meter
- Current measurement: 1000A AC/DC
- Voltage measurement: up to 750V AC; up to approximately 1000V DC
- Measurement method: True RMS
- Safety rating: CAT IV 600V / CAT III 1000V
- Jaw opening / conductor capacity: 2 in (51 mm) maximum
- Display: Dual LCD with TightSight bottom display and backlight
- Functions: AC/DC current, AC/DC voltage, resistance, capacitance, continuity, frequency, peak hold, max/min hold, data hold
- Additional features: High frequency rejection, tapered jaws with hook tip, audible and visual voltage alerts, auto power off, low battery indication
- Battery: 1 x 9V
- Included: Carrying case, test leads, alligator clips
- Warranty: Limited 2-year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.