Class CC Time-Delay Fuse · 5A 600VAC/250VDC · Dual-Element Current-Limiting · Littelfuse CCMR005
What this product is for
This 5A Class CC time-delay fuse is used for branch circuit protection where compact size, current limitation, and inrush tolerance matter. It is commonly selected for control panels, small motors, contactors, lighting circuits, and other industrial or commercial equipment using Class CC fuse blocks.
Use for
Use for 600VAC or 250VDC circuits requiring a 5A Class CC fuse, especially where motor starting or transformer inrush could nuisance-open a fast-acting fuse. It is also suitable where high interrupting rating and compact footprint are important in panel layouts.
Avoid for
Avoid for applications that require a different fuse class, a non-time-delay characteristic, or a different ampere rating. Do not substitute unless the equipment nameplate, fuse block, and protection design specifically call for a Class CC time-delay fuse.
Best for
Best for electricians and panel builders needing a compact Class CC fuse for motor branch circuits and control equipment. A typical buying advantage of Class CC format is reduced panel space compared with larger fuse classes, while still providing strong current-limiting protection.
Installed in
Installed in Class CC fuse holders and fuse blocks in industrial panels, machinery, HVAC controls, motor circuits, and commercial electrical distribution equipment.
Why this product exists
This fuse is designed to allow temporary inrush current during startup while still opening on overloads and short circuits. For motor and control applications, time-delay performance is commonly used to reduce nuisance operation during normal starts. Actual protection performance depends on equipment characteristics, available fault current, fuse coordination, and local electrical code.
Compared with similar products
Compared with fast-acting Class CC fuses, this time-delay dual-element design is better suited to circuits with startup surges. Compared with larger fuse classes, Class CC fuses provide a smaller physical size at 13/32 in x 1-1/2 in (approximately 10.4 mm x 38 mm), which can help save enclosure space.
Specifications
- Product type: Class CC time-delay fuse
- Brand: Littelfuse
- Manufacturer part number: CCMR005 / CCMR005.TXP
- Current rating: 5A
- Voltage rating: 600VAC / 250VDC
- Fuse characteristic: Time-delay, dual-element, current-limiting
- Interrupting rating: 200 kA AC, 20 kA DC
- Physical size: 0.410 in diameter x 1.500 in length (approximately 10.4 mm x 38 mm)
- Fuse class: CC
- Terminal style: Ferrule
- Approvals: UL, CSA, RoHS listed in distributor/manufacturer sources
- Typical applications: Motor branch circuits, small motors, contactors, lighting, heating, and general branch circuit protection
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.