Class CC Time-Delay Fuse · 10A 600VAC/300VDC · Rejection Style Ferrule · Fusetek CCMR10
What this product is for
The CCMR10 is a Class CC time-delay fuse used for overcurrent protection in branch circuits, control panels, and equipment circuits where a compact rejection-style fuse is specified. This 10A fuse format is commonly used where coordinated protection and current-limiting performance are required.
Use for
Use for Class CC fuse holders and disconnects rated for this fuse class, especially in industrial control panels, HVAC equipment, small motor circuits, and control transformer protection where a time-delay characteristic is appropriate. It is commonly chosen when the circuit has temporary inrush current at startup.
Avoid for
Avoid using this fuse where a different fuse class, voltage rating, amp rating, or speed characteristic is specified by the equipment manufacturer. Do not substitute it into non-Class CC holders or where a fast-acting fuse is required.
Best for
Best for electricians and panel builders needing a compact 10A Class CC fuse for 600V AC systems, with time-delay performance to reduce nuisance opening during normal startup conditions. It is also suitable where rejection-style Class CC protection helps prevent incorrect fuse replacement.
Installed in
Typically installed in control panels, fused disconnects, machinery, HVAC control sections, and OEM equipment. Fuse body size for this class is commonly about 1-1/2 in long x 13/32 in diameter (approximately 38 mm x 10 mm), subject to the exact manufacturer design.
Why this product exists
This fuse exists to provide compact branch-circuit protection with time-delay performance, allowing brief inrush currents to pass without unnecessary fuse operation while still protecting downstream components under fault conditions.
Compared with similar products
Compared with fast-acting Class CC fuses, a time-delay Class CC fuse is typically better suited to circuits with startup surge. Compared with larger fuse classes, Class CC fuses save panel space while still offering high interrupting performance in many applications. Typical cross-reference families in this category include Littelfuse CCMR, Mersen ATDR, and Bussmann LP-CC style products; always confirm the exact approval and replacement requirements before substitution.
Specifications
- Product type: Class CC time-delay fuse
- Manufacturer part number: CCMR10
- Brand: Fusetek
- Amp rating: 10A
- Voltage rating: 600VAC / 300VDC
- Fuse class: Class CC
- Construction style: Rejection style ferrule
- Time characteristic: Time-delay
- Typical physical size for this fuse class: 1-1/2 in x 13/32 in (approximately 38 mm x 10 mm)
- Typical application: Branch-circuit, control-circuit, and small motor/control transformer protection where permitted
Rule of thumb: time-delay fuses are commonly used where normal startup or magnetizing inrush would nuisance-open a fast-acting fuse. Actual performance depends on installation conditions, equipment design, available fault current, and local electrical code.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.