:
from
to
Clear
Clear
One-Time Fuse · 30A 250V · Fast-Acting Midget · Fusetek BLN30
SKU: BLN30
30A, 250V one-time fast-acting midget fuse for branch and control circuit protection where a non-renewable cartridge fuse is specified. Typical buying check: match the amp rating, voltage rating, physical size, and fuse class/style to the existing holder and equipment label.
What this product is for
This one-time cartridge fuse is used to protect electrical circuits and equipment from overcurrent where a 30A, 250V fast-acting midget fuse is specified. It is commonly selected for replacement in fused disconnects, control panels, and other equipment using this fuse format.
Use for
Use for replacing an existing BLN30 or equivalent 30A 250V fast-acting midget fuse with the same physical size and holder requirements. Commonly used where quick response to fault current is preferred over time-delay characteristics.
Avoid for
Avoid using this fuse where the equipment nameplate calls for a time-delay fuse, a different interrupting rating, or a different class/style. Do not substitute based on amperage alone.
Best for
Best for maintenance replacement when the existing installation already uses a 13/32 in x 1-1/2 in (approximately 10 x 38 mm) midget fuse format and requires a one-time fast-acting response.
Installed in
Typically installed in fuse blocks, fused disconnects, and industrial or commercial control equipment designed for midget cartridge fuses.
Why this product exists
It provides sacrificial overcurrent protection by opening the circuit during fault conditions, helping protect downstream conductors and equipment. One-time fuses are replaced after operation rather than renewed.
Compared with similar products
Compared with time-delay fuses, a fast-acting fuse generally responds more quickly to overloads and short circuits, which can be useful for circuits with lower inrush tolerance. Compared with larger Class H or Class R cartridge fuses, this midget format is more compact and is selected by holder size and equipment design.
Typical guidance only: always match the replacement fuse to the equipment label, holder, and required protection characteristics. Actual suitability depends on fault current, circuit design, and local electrical code.
Specifications
- Type: One-time cartridge fuse
- Action: Fast-acting
- Current rating: 30A
- Voltage rating: 250V AC
- Format: Midget fuse
- Approximate size: 13/32 in x 1-1/2 in (approximately 10.3 mm x 38.1 mm)
- Terminal style: Ferrule ends
- Part number: BLN30
- Brand: Fusetek
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
SPB2001VB Kora 1 Gang Airtight Non-Metallic Box
1GPBV
Available to Order | Typically Arrives in 1 - 3 Weeks2 – Loyalty Rewards- Edmonton Stock: 38
- Edmonton Stock: 15
