- Edmonton Stock: 59
End Cap · For SLC-402 LED Channel · Channel Finishing Accessory · Axite Lighting Canada SLC-402CAP
End cap for Axite SLC-402 LED channel installations, used to close the channel end for a cleaner finished appearance. Commonly used on LED strip extrusion projects in residential, commercial, and architectural applications where a neat channel termination is required.
Delivered to you by May 21 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
The SLC-402CAP is an end cap for Axite SLC-402 LED channel systems. It is used to finish the exposed end of the extrusion for a cleaner, more complete installation.
Use for
- Finishing Axite SLC-402 channel ends
- LED strip light extrusion installations
- Millwork, shelving, niche, stair, and architectural channel projects
- Residential and light commercial LED strip applications
Avoid for
- Channels other than the Axite SLC-402 series unless fit has been confirmed
- Applications where a different profile, lens, or mounting system is required
- Installations where a sealed or wet-location end treatment is specifically required and not confirmed by the manufacturer
Best for
Best for electricians, lighting installers, and millwork trades finishing SLC-402 LED channel runs where appearance and proper end closure matter.
Installed in
Typically installed in LED strip channel systems used in cabinetry, display shelving, niches, stairs, furniture, and other architectural lighting details. Actual suitability depends on the full channel, lens, strip, and installation method selected.
Why this product exists
LED channel systems look incomplete when the extrusion ends are left open. This end cap helps complete the run, improves the finished appearance, and is commonly used to match the SLC-402 channel profile.
Compared with similar products
This accessory is specific to the SLC-402 channel family. Compared with generic end caps, a matched channel end cap is typically preferred for proper fit and a cleaner finished look. Confirm compatibility with the exact SLC-402 channel before ordering.
Specifications
- Product type: LED channel end cap
- Compatible series: Axite SLC-402
- Application: LED strip light channel finishing accessory
- Category: Extrusion accessory
- Installation role: Closes channel end for a finished appearance
- System use: For LED strip channel installations in residential, commercial, and architectural projects
- Trade note: End caps are typically selected to match the exact extrusion profile; verify channel series before purchase
Typical guidance only. Actual fit and performance depend on the channel profile, lens, installation conditions, and manufacturer compatibility.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 366
- Edmonton Stock: 14
- Edmonton Stock: 10
- Edmonton Stock: 10
