Safety Contactor · 9A, 3-Pole, 1NO+1NC Aux, 120V AC Coil, FVNR · Noark Electrical EX9CA0911G7
What this product is for
The Noark Electrical EX9CA0911G7 is an Ex9CA series safety contactor for safety function applications in industrial and commercial control panels. It is a 3-pole contactor rated 9A with a 120V AC 50/60 Hz coil and 1NO+1NC auxiliary contacts.
Use for
Use for machine safety circuits, motor starters, HVAC control panels, automation panels, and other full-voltage non-reversing (FVNR) control applications where a safety contactor is specified. It mounts on 35 mm DIN rail or panel, which helps when fitting compact control enclosures.
Avoid for
Avoid using this contactor where a standard non-safety contactor is specified for general switching only, where reversing duty is required, or where the coil voltage does not match the control circuit. Also confirm the required current rating, auxiliary contact arrangement, and safety circuit design before ordering.
Best for
Best for electricians, panel builders, OEMs, and maintenance teams needing a 9A safety contactor with a 120V AC coil and built-in 1NO+1NC auxiliary contacts. It is a practical fit for replacement work or new assemblies where 3NO main poles and safety-function switching are required.
Installed in
Typically installed in industrial control cabinets, machine panels, packaged equipment, HVAC equipment panels, and automation enclosures. DIN rail mounting uses standard 35 mm rail, approximately 1.38 in.
Why this product exists
This product exists to provide a safety contactor option for circuits that need controlled power switching as part of a safety function. Compared with a standard IEC contactor, the Ex9CA series is intended specifically for safety applications, helping designers meet the needs of machine and control panel safety systems.
Compared with similar products
Compared with a standard FVNR contactor, this Ex9CA model is the safety-contact version for applications where a safety function is required. Compared with higher-amp models in the same family, the 9A size is typically chosen for smaller motor and control loads. As a rule of thumb, always size the contactor to the actual load, duty, and control scheme rather than choosing by coil voltage alone. Actual suitability depends on the application, switching duty, and local electrical code.
Specifications
- Manufacturer: Noark Electrical
- Manufacturer part number: EX9CA0911G7
- Series: Ex9CA
- Product type: Safety contactor
- Function: Full Voltage Non-Reversing (FVNR)
- Rated current: 9A
- Number of poles: 3
- Main contacts: 3NO
- Auxiliary contacts: 1NO + 1NC
- Coil type: AC
- Coil voltage: 120V AC
- Frequency: 50/60 Hz
- Mounting: 35 mm DIN rail or panel mount
- Rated insulation voltage (Ui): 690V
- Rated impulse withstand voltage (Uimp): 6 kV
- Standards / certifications: IEC/EN 60947-4-1, IEC/UL 60947-4-1; suitable listings indicate UL and CSA certification
- Coil Voltage Range120Vac
- Number Of Poles3 Pole
- Contactor TypeSafety Rated Contactor
- Amp Rating9A
- BrandNoark Electrical
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.