- Edmonton Stock: 1
755 lm LED dual remote head · 2 x 5W · 6-24VDC thermoplastic adjustable heads · Etlin-Daniels ER250DWH-U24D-10
LED dual remote head for emergency lighting systems with two 5W adjustable lamp heads, 755 lm output, and 6-24VDC input. Designed for wall or ceiling mounting on compatible remote-capable emergency units where stable egress illumination is required during battery discharge.
What this product is for
This LED dual remote head is used as a remote emergency lighting fixture connected to a compatible 6-24VDC emergency lighting unit. It provides additional path-of-egress illumination where the main emergency unit needs extra remote lamp coverage.
Use for
Use for indoor emergency lighting layouts in corridors, exits, stairwells, service rooms, and commercial spaces where remote heads are required. Suitable for wall or ceiling mounting, with surface mounting holes aligned for common J-box installation.
Avoid for
Avoid using this product as a standalone emergency unit, on line voltage circuits, or in wet or washdown locations. This model is rated IP20 and is intended for indoor use only.
Best for
Best for contractors replacing or extending compatible Etlin-Daniels or other remote-capable emergency lighting systems that accept 6-24VDC remote heads. The adjustable, lockable heads help aim light where egress coverage is needed most.
Installed in
Typically installed in commercial, institutional, and light industrial interiors. Common mounting locations include above exit routes, in hallways, stair landings, and utility areas. Typical emergency lighting systems are designed for 30-minute backup operation, but actual runtime depends on the connected emergency unit and total remote load.
Why this product exists
This remote head allows one emergency power source to feed additional lamp heads away from the main unit, helping meet emergency lighting layout requirements without installing a full emergency unit at every location.
Compared with similar products
Compared with lower-output remote heads, this model uses two 5W LED heads for higher light output. Compared with fixed-head designs, the lamp heads are adjustable and lockable for aiming flexibility. It is intended for 6-24VDC systems, so buyers should confirm voltage compatibility and remote capacity on the connected emergency unit before ordering.
Typical guidance: remote heads add load to the emergency unit battery system, so fixture quantity and spacing should be checked against the unit's rated remote capacity and local code requirements. Actual performance depends on installation conditions, layout, mounting height, and local electrical code.
Specifications
- Product type: LED dual remote head for emergency lighting
- Brand: Etlin-Daniels
- Manufacturer part number: ER250DWH-U24D-10
- Input voltage: 6-24VDC
- Head configuration: 2 adjustable LED heads
- Wattage: 2 x 5W
- Total output power: 10W
- Lumen output: 755 lm
- Output voltage: 3V
- Maximum discharge current: 1820 mA
- Colour temperature: 6000-6500K
- Housing material: high-impact ABS thermoplastic
- Mounting: wall or ceiling mount; surface mounting holes match J-box
- Finish: white
- Ingress protection: IP20
- Operating temperature: 0 to 30°C (32 to 86°F)
- Safety classification: Class II
- Certifications: cCSAus; complies with CSA 22.2 No. 141-15; meets ICES-005 requirements
- Alternative toStanpro N2-06-12-5W-LJ-WH
- BrandEtlin Daniels
- Warranty5 year
- Lighting Emergency
- Input Volts6V - 12V
- Wattage2 x 5 WATT 400(800) LUMEN
- DurationNo Battery
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 16
- Edmonton Stock: 8
Running Man Exit Sign · 120/347V · Self-Powered Battery Backup · Ortech OE-126
OE-126
61 – Loyalty Rewards- Edmonton Stock: 476
- Stocking Transition · Limited Availability
