- Edmonton Stock: 10
Teleduct 90° Bend · 2 in · 24 in Radius · Orange PVC · Westlake Pipe & Fittings 93122
Orange PVC Teleduct 90° bend for 2 in conduit runs, with a 24 in radius to change direction in underground telecommunications duct systems. Commonly used where a controlled sweep is needed to help protect cable during pulls; actual cable performance depends on installation conditions, cable type, layout, and local electrical code.
What this product is for
This 2 in Teleduct 90° bend is used to change direction in orange PVC telecommunications duct runs. It is intended for underground telecommunication duct systems where a formed sweep helps maintain a consistent bend path for cable installation.
Use for
Use for 2 in orange Teleduct runs, directional changes in duct banks, and underground communications raceways where a 90° change of direction is required. The 24 in radius provides a broader sweep than a tight elbow, which is typically preferred for cable pulling and cable protection.
Avoid for
Avoid using this bend where a different duct system, trade size, bend radius, or fitting standard is required. Do not assume suitability for power conduit applications unless the full system design and local code requirements match the intended use.
Best for
Best for contractors installing underground telecom duct where orange identification and a controlled 90° sweep are required. It is a practical choice when matching existing Teleduct components in Canadian utility, site, and communications infrastructure work.
Installed in
Typically installed in underground telecommunications duct runs, site services, utility corridors, and concrete-encased or direct-buried raceway layouts, subject to project design and code requirements.
Why this product exists
This fitting exists to provide a factory-formed 90° directional change in a 2 in Teleduct system without field bending. A sweep radius like 24 in (610 mm) is commonly selected to support smoother cable pulls and reduce stress on installed communications cable compared with sharper changes in direction.
Compared with similar products
Compared with tighter-radius elbows, a 24 in (610 mm) sweep is typically chosen where cable handling matters more than saving space. Compared with larger-radius sweeps, it uses less layout space while still providing a controlled bend for many standard telecom duct applications.
Specifications
- Product type: Teleduct bend / elbow
- Angle: 90°
- Trade size: 2 in (51 mm)
- Bend radius: 24 in (610 mm)
- Colour: Orange
- Material: PVC
- Application: Underground telecommunications duct systems
- Brand: Westlake Pipe & Fittings
- Manufacturer part number: 93122
- Made in Canada: Category indicates Canadian-made product line
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 5
Rigid PVC Duct Solvent Cement · 250 mL · EcoVOC Clear Formula · Royal RVOC250
RVOC250
22 – Loyalty RewardsTeleduct 90° Bend · 2 in x 36 in Radius · Orange PVC DB2/Telecom Duct · Royal 93102
93102
Available to Order | Typically Arrives in 1 - 3 Weeks Ships from Abbotsford BC Factory32 – Loyalty Rewards- Edmonton Stock: 5
Duct Coupling · 3 in · Solvent Weld PVC · White · Westlake Pipe & Fittings SWC03
SWC03
Available to Order | Typically Arrives in 1 - 3 Weeks Ships from Abbotsford BC Factory3 – Loyalty Rewards
