- Edmonton Stock: 5
Rigid PVC Duct Solvent Cement · 250 mL · EcoVOC Clear Formula · Royal RVOC250
RVOC250
22
– Loyalty Rewards
:
from
to
Clear
Clear
Teleduct 90° Bend · 1 in · 12 in Radius · Orange PVC · Westlake Pipe & Fittings 93101
SKU: 93101
Orange PVC Teleduct 90° bend for 1 in telecommunications duct runs, with a 12 in radius for directional changes in underground or direct-burial raceway systems. Commonly selected where a long sweep helps cable pulling and reduces stress on communication cable during installation.
What this product is for
This 1 in Teleduct 90° bend is used to change direction in orange PVC telecommunications duct systems. It is intended for underground and direct-burial raceway layouts where a controlled sweep is needed instead of a sharper turn.
Use for
Use for telecom and low-voltage duct banks, service entrances, site pathways, and other communication raceway installations that call for a 1 in trade size bend with a 12 in radius. The orange colour helps identify the run as communications duct.
Avoid for
Avoid using this bend where a different duct system, bend radius, or conduit standard is specified. Do not assume suitability for power conduit applications unless the project documents and local code specifically allow it.
Best for
Best for installers who need a factory-formed 90° sweep for cleaner routing and more consistent cable pulling than field-bent alternatives. A longer sweep is typically preferred where cable protection and pullability matter.
Installed in
Typically installed in underground telecommunications pathways, direct-burial duct runs, site servicing, and utility or commercial communication infrastructure in Canada.
Why this product exists
Factory bends simplify layout changes while maintaining a known radius and matching Teleduct system components. For cable installations, a sweep bend is commonly used to help reduce pulling friction and cable stress. Actual pulling performance depends on cable type, fill, lubricant, layout, and installation conditions.
Compared with similar products
Compared with a tighter bend, a 12 in (305 mm) radius sweep is generally chosen where easier cable pulling is preferred. Compared with larger Teleduct bends, this fitting matches 1 in trade size systems and is suited to smaller communications pathways.
Specifications
- Product type: Teleduct bend
- Angle: 90°
- Trade size: 1 in
- Bend radius: 12 in (305 mm)
- Material: PVC
- Colour: Orange
- System: Teleduct / telecommunications duct
- Application: Underground and direct-burial communications raceway
- Brand: Westlake Pipe & Fittings
- Manufacturer part number: 93101
- Country note: Made in Canada category listing
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.