- Edmonton Stock: 58
:
from
to
Clear
Clear
Decora/GFCI Device Cover · 4 in Square · 3/8 in Raised · Vista BC8376
SKU: 8376
4 in square steel device cover with a Decora/GFCI opening and 3/8 in raised profile for use on metal square boxes. Commonly used to mount a decorator-style receptacle or GFCI while maintaining box access and finished device alignment.
Delivered to you by Aug 13 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
This 4 in square (102 mm) raised steel device cover is used to mount one Decora or GFCI-style wiring device on a 4 in square metal box. The 3/8 in (9.5 mm) raised depth helps bring the device forward to suit the finished wall surface and cover the box opening correctly.
Use for
Use for commercial, institutional, and residential rough-in where a 4 in square box is already installed and the final device is a decorator-style switch, receptacle, or GFCI. Common applications include utility rooms, service spaces, unfinished areas, and exposed raceway or box installations.
Avoid for
Avoid where a finished decorative wall plate alone is required, or where the box and device layout call for a different mud ring, gang arrangement, or raised depth. Do not use if the installed device opening or box size does not match a 4 in square cover format.
Best for
Best for electricians needing a straightforward steel cover for a single Decora/GFCI device on a standard 4 in square box. It is a practical choice when you need a code-appropriate device mounting cover rather than a finished trim plate.
Installed in
Typically installed on 4 in square steel boxes in walls or surface-mounted box systems in commercial and light industrial settings, as well as residential service areas. Commonly paired with metal boxes and conduit-based installations.
Why this product exists
Square box device covers let contractors use standard 4 in square boxes during rough-in, then adapt the opening for the final wiring device at trim-out. This approach can simplify stock, support box fill planning, and make device changes easier later.
Compared with similar products
Compared with a flat box cover, this raised device cover positions the device forward for better fit at the wall finish. Compared with a multi-gang cover, this version is intended for one Decora/GFCI device opening only. Typical selection depends on device style, wall finish, and required raised depth.
Rule of thumb: choose the cover opening to match the actual device style, and choose the raised depth to suit the finished surface build-up. Actual fit depends on box position, wall finish, and local electrical code.
Specifications
- Product type: Device cover plate for metal square box
- Device opening: Decora / GFCI style
- Box size: 4 in square (102 mm)
- Raised depth: 3/8 in (9.5 mm)
- Material: Steel, galvanized finish
- Application: Mounting one decorator-style device on a 4 in square box
- Brand: Vista
- Manufacturer part number: BC8376
- Approvals: CSA/UL listed where specified by manufacturer/distributor listing
- Similar or Equal ToBC8372
- Gang4" X 4"
- StyleDecora
- Number of Devices1 Device
- MaterialMetal Galvanized
- BrandWhite Label
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 213
- Edmonton Stock: 12
4 in Square Box Cover · 2 Decora/GFCI Openings · Galvanized Metal · Vista 8368
8368
10 – Loyalty Rewards- Edmonton Stock: 161
- Edmonton Stock: 34
- Edmonton Stock: 130
